2185 lines
82 KiB
Perl
2185 lines
82 KiB
Perl
|
|
include("secrets")
|
|
|
|
info["owner"] = "backuppc"
|
|
info["group"] = "root"
|
|
info["perms"] = 0600
|
|
|
|
@#============================================================= -*-perl-*-
|
|
@#
|
|
@# Configuration file for BackupPC.
|
|
@#
|
|
@# DESCRIPTION
|
|
@#
|
|
@# This is the main configuration file for BackupPC.
|
|
@#
|
|
@# This file must be valid perl source, so make sure the punctuation,
|
|
@# quotes, and other syntax are valid.
|
|
@#
|
|
@# This file is read by BackupPC at startup, when a HUP (-1) signal
|
|
@# is sent to BackupPC and also at each wakeup time whenever the
|
|
@# modification time of this file changes.
|
|
@#
|
|
@# The configuration parameters are divided into four general groups.
|
|
@# The first group (general server configuration) provides general
|
|
@# configuration for BackupPC. The next two groups describe what
|
|
@# to backup, when to do it, and how long to keep it. The fourth
|
|
@# group are settings for the CGI http interface.
|
|
@#
|
|
@# Configuration settings can also be specified on a per-PC basis.
|
|
@# Simply put the relevant settings in a config.pl file in the
|
|
@# PC's backup directory (ie: in __TOPDIR__/pc/hostName).
|
|
@# All configuration settings in the second, third and fourth
|
|
@# groups can be overridden by the per-PC config.pl file.
|
|
@#
|
|
@# AUTHOR
|
|
@# Craig Barratt <cbarratt@users.sourceforge.net>
|
|
@#
|
|
@# COPYRIGHT
|
|
@# Copyright (C) 2001-2007 Craig Barratt
|
|
@#
|
|
@# See http://backuppc.sourceforge.net.
|
|
@#
|
|
@#========================================================================
|
|
@
|
|
@###########################################################################
|
|
@# General server configuration
|
|
@###########################################################################
|
|
@#
|
|
@# Host name on which the BackupPC server is running.
|
|
@#
|
|
@$ENV{'PATH'} = '/bin:/usr/bin';
|
|
@delete @ENV{'IFS', 'CDPATH', 'ENV', 'BASH_ENV'};
|
|
@$Conf{ServerHost} = `hostname`;
|
|
@chomp($Conf{ServerHost});
|
|
@
|
|
@#
|
|
@# TCP port number on which the BackupPC server listens for and accepts
|
|
@# connections. Normally this should be disabled (set to -1). The TCP
|
|
@# port is only needed if apache runs on a different machine from BackupPC.
|
|
@# In that case, set this to any spare port number over 1024 (eg: 2359).
|
|
@# If you enable the TCP port, make sure you set $Conf{ServerMesgSecret}
|
|
@# too!
|
|
@#
|
|
@$Conf{ServerPort} = -1;
|
|
@
|
|
@#
|
|
@# Shared secret to make the TCP port secure. Set this to a hard to guess
|
|
@# string if you enable the TCP port (ie: $Conf{ServerPort} > 0).
|
|
@#
|
|
@# To avoid possible attacks via the TCP socket interface, every client
|
|
@# message is protected by an MD5 digest. The MD5 digest includes four
|
|
@# items:
|
|
@# - a seed that is sent to the client when the connection opens
|
|
@# - a sequence number that increments for each message
|
|
@# - a shared secret that is stored in $Conf{ServerMesgSecret}
|
|
@# - the message itself.
|
|
@#
|
|
@# The message is sent in plain text preceded by the MD5 digest. A
|
|
@# snooper can see the plain-text seed sent by BackupPC and plain-text
|
|
@# message from the client, but cannot construct a valid MD5 digest since
|
|
@# the secret $Conf{ServerMesgSecret} is unknown. A replay attack is
|
|
@# not possible since the seed changes on a per-connection and
|
|
@# per-message basis.
|
|
@#
|
|
@$Conf{ServerMesgSecret} = '';
|
|
@
|
|
@#
|
|
@# PATH setting for BackupPC. An explicit value is necessary
|
|
@# for taint mode. Value shouldn't matter too much since
|
|
@# all execs use explicit paths. However, taint mode in perl
|
|
@# will complain if this directory is world writable.
|
|
@#
|
|
@$Conf{MyPath} = '/bin';
|
|
@
|
|
@#
|
|
@# Permission mask for directories and files created by BackupPC.
|
|
@# Default value prevents any access from group other, and prevents
|
|
@# group write.
|
|
@#
|
|
@$Conf{UmaskMode} = 027;
|
|
@
|
|
@#
|
|
@# Times at which we wake up, check all the PCs, and schedule necessary
|
|
@# backups. Times are measured in hours since midnight. Can be
|
|
@# fractional if necessary (eg: 4.25 means 4:15am).
|
|
@#
|
|
@# If the hosts you are backing up are always connected to the network
|
|
@# you might have only one or two wakeups each night. This will keep
|
|
@# the backup activity after hours. On the other hand, if you are backing
|
|
@# up laptops that are only intermittently connected to the network you
|
|
@# will want to have frequent wakeups (eg: hourly) to maximize the chance
|
|
@# that each laptop is backed up.
|
|
@#
|
|
@# Examples:
|
|
@# $Conf{WakeupSchedule} = [22.5]; # once per day at 10:30 pm.
|
|
@# $Conf{WakeupSchedule} = [2,4,6,8,10,12,14,16,18,20,22]; # every 2 hours
|
|
@#
|
|
@# The default value is every hour except midnight.
|
|
@#
|
|
@# The first entry of $Conf{WakeupSchedule} is when BackupPC_nightly is run.
|
|
@# You might want to re-arrange the entries in $Conf{WakeupSchedule}
|
|
@# (they don't have to be ascending) so that the first entry is when
|
|
@# you want BackupPC_nightly to run (eg: when you don't expect a lot
|
|
@# of regular backups to run).
|
|
@#
|
|
@$Conf{WakeupSchedule} = [1..23];
|
|
@
|
|
@#
|
|
@# Maximum number of simultaneous backups to run. If there
|
|
@# are no user backup requests then this is the maximum number
|
|
@# of simultaneous backups.
|
|
@#
|
|
@$Conf{MaxBackups} = 2;
|
|
@
|
|
@#
|
|
@# Additional number of simultaneous backups that users can run.
|
|
@# As many as $Conf{MaxBackups} + $Conf{MaxUserBackups} requests can
|
|
@# run at the same time.
|
|
@#
|
|
@$Conf{MaxUserBackups} = 30;
|
|
@
|
|
@#
|
|
@# Maximum number of pending link commands. New backups will only be
|
|
@# started if there are no more than $Conf{MaxPendingCmds} plus
|
|
@# $Conf{MaxBackups} number of pending link commands, plus running jobs.
|
|
@# This limit is to make sure BackupPC doesn't fall too far behind in
|
|
@# running BackupPC_link commands.
|
|
@#
|
|
@$Conf{MaxPendingCmds} = 10;
|
|
@
|
|
@#
|
|
@# How many BackupPC_nightly processes to run in parallel.
|
|
@#
|
|
@# Each night, at the first wakeup listed in $Conf{WakeupSchedule},
|
|
@# BackupPC_nightly is run. Its job is to remove unneeded files
|
|
@# in the pool, ie: files that only have one link. To avoid race
|
|
@# conditions, BackupPC_nightly and BackupPC_link cannot run at
|
|
@# the same time. Starting in v3.0.0, BackupPC_nightly can run
|
|
@# concurrently with backups (BackupPC_dump).
|
|
@#
|
|
@# So to reduce the elapsed time, you might want to increase this
|
|
@# setting to run several BackupPC_nightly processes in parallel
|
|
@# (eg: 4, or even 8).
|
|
@#
|
|
@$Conf{MaxBackupPCNightlyJobs} = 2;
|
|
@
|
|
@#
|
|
@# How many days (runs) it takes BackupPC_nightly to traverse the
|
|
@# entire pool. Normally this is 1, which means every night it runs,
|
|
@# it does traverse the entire pool removing unused pool files.
|
|
@#
|
|
@# Other valid values are 2, 4, 8, 16. This causes BackupPC_nightly to
|
|
@# traverse 1/2, 1/4, 1/8 or 1/16th of the pool each night, meaning it
|
|
@# takes 2, 4, 8 or 16 days to completely traverse the pool. The
|
|
@# advantage is that each night the running time of BackupPC_nightly
|
|
@# is reduced roughly in proportion, since the total job is split
|
|
@# over multiple days. The disadvantage is that unused pool files
|
|
@# take longer to get deleted, which will slightly increase disk
|
|
@# usage.
|
|
@#
|
|
@# Note that even when $Conf{BackupPCNightlyPeriod} > 1, BackupPC_nightly
|
|
@# still runs every night. It just does less work each time it runs.
|
|
@#
|
|
@# Examples:
|
|
@#
|
|
@# $Conf{BackupPCNightlyPeriod} = 1; # entire pool is checked every night
|
|
@#
|
|
@# $Conf{BackupPCNightlyPeriod} = 2; # two days to complete pool check
|
|
@# # (different half each night)
|
|
@#
|
|
@# $Conf{BackupPCNightlyPeriod} = 4; # four days to complete pool check
|
|
@# # (different quarter each night)
|
|
@#
|
|
@$Conf{BackupPCNightlyPeriod} = 4;
|
|
@
|
|
@#
|
|
@# Maximum number of log files we keep around in log directory.
|
|
@# These files are aged nightly. A setting of 14 means the log
|
|
@# directory will contain about 2 weeks of old log files, in
|
|
@# particular at most the files LOG, LOG.0, LOG.1, ... LOG.13
|
|
@# (except today's LOG, these files will have a .z extension if
|
|
@# compression is on).
|
|
@#
|
|
@# If you decrease this number after BackupPC has been running for a
|
|
@# while you will have to manually remove the older log files.
|
|
@#
|
|
@$Conf{MaxOldLogFiles} = 14;
|
|
@
|
|
@#
|
|
@# Full path to the df command. Security caution: normal users
|
|
@# should not allowed to write to this file or directory.
|
|
@#
|
|
@$Conf{DfPath} = '/bin/df';
|
|
@
|
|
@#
|
|
@# Command to run df. The following variables are substituted at run-time:
|
|
@#
|
|
@# $dfPath path to df ($Conf{DfPath})
|
|
@# $topDir top-level BackupPC data directory
|
|
@#
|
|
@# Note: all Cmds are executed directly without a shell, so the prog name
|
|
@# needs to be a full path and you can't include shell syntax like
|
|
@# redirection and pipes; put that in a script if you need it.
|
|
@#
|
|
@$Conf{DfCmd} = '$dfPath $topDir';
|
|
@
|
|
@#
|
|
@# Full path to various commands for archiving
|
|
@#
|
|
@$Conf{SplitPath} = '/usr/bin/split';
|
|
@$Conf{ParPath} = '/usr/bin/par2' if -x '/usr/bin/par2';
|
|
@$Conf{CatPath} = '/bin/cat';
|
|
@$Conf{GzipPath} = '/bin/gzip';
|
|
@$Conf{Bzip2Path} = '/bin/bzip2';
|
|
@
|
|
@#
|
|
@# Maximum threshold for disk utilization on the __TOPDIR__ filesystem.
|
|
@# If the output from $Conf{DfPath} reports a percentage larger than
|
|
@# this number then no new regularly scheduled backups will be run.
|
|
@# However, user requested backups (which are usually incremental and
|
|
@# tend to be small) are still performed, independent of disk usage.
|
|
@# Also, currently running backups will not be terminated when the disk
|
|
@# usage exceeds this number.
|
|
@#
|
|
@$Conf{DfMaxUsagePct} = 95;
|
|
@
|
|
@#
|
|
@# How long BackupPC_trashClean sleeps in seconds between each check
|
|
@# of the trash directory. Once every 5 minutes should be reasonable.
|
|
@#
|
|
@$Conf{TrashCleanSleepSec} = 300;
|
|
@
|
|
@#
|
|
@# List of DHCP address ranges we search looking for PCs to backup.
|
|
@# This is an array of hashes for each class C address range.
|
|
@# This is only needed if hosts in the conf/hosts file have the
|
|
@# dhcp flag set.
|
|
@#
|
|
@# Examples:
|
|
@# # to specify 192.10.10.20 to 192.10.10.250 as the DHCP address pool
|
|
@# $Conf{DHCPAddressRanges} = [
|
|
@# {
|
|
@# ipAddrBase => '192.10.10',
|
|
@# first => 20,
|
|
@# last => 250,
|
|
@# },
|
|
@# ];
|
|
@# # to specify two pools (192.10.10.20-250 and 192.10.11.10-50)
|
|
@# $Conf{DHCPAddressRanges} = [
|
|
@# {
|
|
@# ipAddrBase => '192.10.10',
|
|
@# first => 20,
|
|
@# last => 250,
|
|
@# },
|
|
@# {
|
|
@# ipAddrBase => '192.10.11',
|
|
@# first => 10,
|
|
@# last => 50,
|
|
@# },
|
|
@# ];
|
|
@#
|
|
@$Conf{DHCPAddressRanges} = [];
|
|
@
|
|
@#
|
|
@# The BackupPC user.
|
|
@#
|
|
@$Conf{BackupPCUser} = 'backuppc';
|
|
@
|
|
@#
|
|
@# Important installation directories:
|
|
@#
|
|
@# TopDir - where all the backup data is stored
|
|
@# ConfDir - where the main config and hosts files resides
|
|
@# LogDir - where log files and other transient information
|
|
@# InstallDir - where the bin, lib and doc installation dirs reside.
|
|
@# Note: you cannot change this value since all the
|
|
@# perl scripts include this path. You must reinstall
|
|
@# with configure.pl to change InstallDir.
|
|
@# CgiDir - Apache CGI directory for BackupPC_Admin
|
|
@#
|
|
@$Conf{TopDir} = '/var/lib/backuppc';
|
|
@$Conf{ConfDir} = '/etc/backuppc';
|
|
@$Conf{LogDir} = '';
|
|
@$Conf{InstallDir} = '/usr/share/backuppc';
|
|
@$Conf{CgiDir} = '/usr/share/backuppc/cgi-bin';
|
|
@
|
|
@#
|
|
@# Whether BackupPC and the CGI script BackupPC_Admin verify that they
|
|
@# are really running as user $Conf{BackupPCUser}. If this flag is set
|
|
@# and the effective user id (euid) differs from $Conf{BackupPCUser}
|
|
@# then both scripts exit with an error. This catches cases where
|
|
@# BackupPC might be accidently started as root or the wrong user,
|
|
@# or if the CGI script is not installed correctly.
|
|
@#
|
|
@$Conf{BackupPCUserVerify} = 1;
|
|
@
|
|
@#
|
|
@# Maximum number of hardlinks supported by the $TopDir file system
|
|
@# that BackupPC uses. Most linux or unix file systems should support
|
|
@# at least 32000 hardlinks per file, or 64000 in other cases. If a pool
|
|
@# file already has this number of hardlinks, a new pool file is created
|
|
@# so that new hardlinks can be accommodated. This limit will only
|
|
@# be hit if an identical file appears at least this number of times
|
|
@# across all the backups.
|
|
@#
|
|
@$Conf{HardLinkMax} = 31999;
|
|
@
|
|
@#
|
|
@# Advanced option for asking BackupPC to load additional perl modules.
|
|
@# Can be a list (array ref) of module names to load at startup.
|
|
@#
|
|
@$Conf{PerlModuleLoad} = undef;
|
|
@
|
|
@#
|
|
@# Path to init.d script and command to use that script to start the
|
|
@# server from the CGI interface. The following variables are substituted
|
|
@# at run-time:
|
|
@#
|
|
@# $sshPath path to ssh ($Conf{SshPath})
|
|
@# $serverHost same as $Conf{ServerHost}
|
|
@# $serverInitdPath path to init.d script ($Conf{ServerInitdPath})
|
|
@#
|
|
@# Example:
|
|
@#
|
|
@# $Conf{ServerInitdPath} = '/etc/init.d/backuppc';
|
|
@# $Conf{ServerInitdStartCmd} = '$sshPath -q -x -l root $serverHost'
|
|
@# . ' $serverInitdPath start'
|
|
@# . ' < /dev/null >& /dev/null';
|
|
@#
|
|
@# Note: all Cmds are executed directly without a shell, so the prog name
|
|
@# needs to be a full path and you can't include shell syntax like
|
|
@# redirection and pipes; put that in a script if you need it.
|
|
@#
|
|
@$Conf{ServerInitdPath} = '';
|
|
@$Conf{ServerInitdStartCmd} = '';
|
|
@
|
|
@
|
|
@###########################################################################
|
|
@# What to backup and when to do it
|
|
@# (can be overridden in the per-PC config.pl)
|
|
@###########################################################################
|
|
@#
|
|
@# Minimum period in days between full backups. A full dump will only be
|
|
@# done if at least this much time has elapsed since the last full dump,
|
|
@# and at least $Conf{IncrPeriod} days has elapsed since the last
|
|
@# successful dump.
|
|
@#
|
|
@# Typically this is set slightly less than an integer number of days. The
|
|
@# time taken for the backup, plus the granularity of $Conf{WakeupSchedule}
|
|
@# will make the actual backup interval a bit longer.
|
|
@#
|
|
@$Conf{FullPeriod} = 6.97;
|
|
@
|
|
@#
|
|
@# Minimum period in days between incremental backups (a user requested
|
|
@# incremental backup will be done anytime on demand).
|
|
@#
|
|
@# Typically this is set slightly less than an integer number of days. The
|
|
@# time taken for the backup, plus the granularity of $Conf{WakeupSchedule}
|
|
@# will make the actual backup interval a bit longer.
|
|
@#
|
|
@$Conf{IncrPeriod} = 0.97;
|
|
@
|
|
@#
|
|
@# Number of full backups to keep. Must be >= 1.
|
|
@#
|
|
@# In the steady state, each time a full backup completes successfully
|
|
@# the oldest one is removed. If this number is decreased, the
|
|
@# extra old backups will be removed.
|
|
@#
|
|
@# If filling of incremental dumps is off the oldest backup always
|
|
@# has to be a full (ie: filled) dump. This might mean one or two
|
|
@# extra full dumps are kept until the oldest incremental backups expire.
|
|
@#
|
|
@# Exponential backup expiry is also supported. This allows you to specify:
|
|
@#
|
|
@# - num fulls to keep at intervals of 1 * $Conf{FullPeriod}, followed by
|
|
@# - num fulls to keep at intervals of 2 * $Conf{FullPeriod},
|
|
@# - num fulls to keep at intervals of 4 * $Conf{FullPeriod},
|
|
@# - num fulls to keep at intervals of 8 * $Conf{FullPeriod},
|
|
@# - num fulls to keep at intervals of 16 * $Conf{FullPeriod},
|
|
@#
|
|
@# and so on. This works by deleting every other full as each expiry
|
|
@# boundary is crossed.
|
|
@#
|
|
@# Exponential expiry is specified using an array for $Conf{FullKeepCnt}:
|
|
@#
|
|
@# $Conf{FullKeepCnt} = [4, 2, 3];
|
|
@#
|
|
@# Entry #n specifies how many fulls to keep at an interval of
|
|
@# 2^n * $Conf{FullPeriod} (ie: 1, 2, 4, 8, 16, 32, ...).
|
|
@#
|
|
@# The example above specifies keeping 4 of the most recent full backups
|
|
@# (1 week interval) two full backups at 2 week intervals, and 3 full
|
|
@# backups at 4 week intervals, eg:
|
|
@#
|
|
@# full 0 19 weeks old \
|
|
@# full 1 15 weeks old >--- 3 backups at 4 * $Conf{FullPeriod}
|
|
@# full 2 11 weeks old /
|
|
@# full 3 7 weeks old \____ 2 backups at 2 * $Conf{FullPeriod}
|
|
@# full 4 5 weeks old /
|
|
@# full 5 3 weeks old \
|
|
@# full 6 2 weeks old \___ 4 backups at 1 * $Conf{FullPeriod}
|
|
@# full 7 1 week old /
|
|
@# full 8 current /
|
|
@#
|
|
@# On a given week the spacing might be less than shown as each backup
|
|
@# ages through each expiry period. For example, one week later, a
|
|
@# new full is completed and the oldest is deleted, giving:
|
|
@#
|
|
@# full 0 16 weeks old \
|
|
@# full 1 12 weeks old >--- 3 backups at 4 * $Conf{FullPeriod}
|
|
@# full 2 8 weeks old /
|
|
@# full 3 6 weeks old \____ 2 backups at 2 * $Conf{FullPeriod}
|
|
@# full 4 4 weeks old /
|
|
@# full 5 3 weeks old \
|
|
@# full 6 2 weeks old \___ 4 backups at 1 * $Conf{FullPeriod}
|
|
@# full 7 1 week old /
|
|
@# full 8 current /
|
|
@#
|
|
@# You can specify 0 as a count (except in the first entry), and the
|
|
@# array can be as long as you wish. For example:
|
|
@#
|
|
@# $Conf{FullKeepCnt} = [4, 0, 4, 0, 0, 2];
|
|
@#
|
|
@# This will keep 10 full dumps, 4 most recent at 1 * $Conf{FullPeriod},
|
|
@# followed by 4 at an interval of 4 * $Conf{FullPeriod} (approx 1 month
|
|
@# apart), and then 2 at an interval of 32 * $Conf{FullPeriod} (approx
|
|
@# 7-8 months apart).
|
|
@#
|
|
@# Example: these two settings are equivalent and both keep just
|
|
@# the four most recent full dumps:
|
|
@#
|
|
@# $Conf{FullKeepCnt} = 4;
|
|
@# $Conf{FullKeepCnt} = [4];
|
|
@#
|
|
@$Conf{FullKeepCnt} = [4, 0, 2];
|
|
@
|
|
@#
|
|
@# Very old full backups are removed after $Conf{FullAgeMax} days. However,
|
|
@# we keep at least $Conf{FullKeepCntMin} full backups no matter how old
|
|
@# they are.
|
|
@#
|
|
@# Note that $Conf{FullAgeMax} will be increased to $Conf{FullKeepCnt}
|
|
@# times $Conf{FullPeriod} if $Conf{FullKeepCnt} specifies enough
|
|
@# full backups to exceed $Conf{FullAgeMax}.
|
|
@#
|
|
@$Conf{FullKeepCntMin} = 1;
|
|
@$Conf{FullAgeMax} = 90;
|
|
@
|
|
@#
|
|
@# Number of incremental backups to keep. Must be >= 1.
|
|
@#
|
|
@# In the steady state, each time an incr backup completes successfully
|
|
@# the oldest one is removed. If this number is decreased, the
|
|
@# extra old backups will be removed.
|
|
@#
|
|
@$Conf{IncrKeepCnt} = 6;
|
|
@
|
|
@#
|
|
@# Very old incremental backups are removed after $Conf{IncrAgeMax} days.
|
|
@# However, we keep at least $Conf{IncrKeepCntMin} incremental backups no
|
|
@# matter how old they are.
|
|
@#
|
|
@$Conf{IncrKeepCntMin} = 1;
|
|
@$Conf{IncrAgeMax} = 30;
|
|
@
|
|
@#
|
|
@# Level of each incremental. "Level" follows the terminology
|
|
@# of dump(1). A full backup has level 0. A new incremental
|
|
@# of level N will backup all files that have changed since
|
|
@# the most recent backup of a lower level.
|
|
@#
|
|
@# The entries of $Conf{IncrLevels} apply in order to each
|
|
@# incremental after each full backup. It wraps around until
|
|
@# the next full backup. For example, these two settings
|
|
@# have the same effect:
|
|
@#
|
|
@# $Conf{IncrLevels} = [1, 2, 3];
|
|
@# $Conf{IncrLevels} = [1, 2, 3, 1, 2, 3];
|
|
@#
|
|
@# This means the 1st and 4th incrementals (level 1) go all
|
|
@# the way back to the full. The 2nd and 3rd (and 5th and
|
|
@# 6th) backups just go back to the immediate preceeding
|
|
@# incremental.
|
|
@#
|
|
@# Specifying a sequence of multi-level incrementals will
|
|
@# usually mean more than $Conf{IncrKeepCnt} incrementals will
|
|
@# need to be kept, since lower level incrementals are needed
|
|
@# to merge a complete view of a backup. For example, with
|
|
@#
|
|
@# $Conf{FullPeriod} = 7;
|
|
@# $Conf{IncrPeriod} = 1;
|
|
@# $Conf{IncrKeepCnt} = 6;
|
|
@# $Conf{IncrLevels} = [1, 2, 3, 4, 5, 6];
|
|
@#
|
|
@# there will be up to 11 incrementals in this case:
|
|
@#
|
|
@# backup #0 (full, level 0, oldest)
|
|
@# backup #1 (incr, level 1)
|
|
@# backup #2 (incr, level 2)
|
|
@# backup #3 (incr, level 3)
|
|
@# backup #4 (incr, level 4)
|
|
@# backup #5 (incr, level 5)
|
|
@# backup #6 (incr, level 6)
|
|
@# backup #7 (full, level 0)
|
|
@# backup #8 (incr, level 1)
|
|
@# backup #9 (incr, level 2)
|
|
@# backup #10 (incr, level 3)
|
|
@# backup #11 (incr, level 4)
|
|
@# backup #12 (incr, level 5, newest)
|
|
@#
|
|
@# Backup #1 (the oldest level 1 incremental) can't be deleted
|
|
@# since backups 2..6 depend on it. Those 6 incrementals can't
|
|
@# all be deleted since that would only leave 5 (#8..12).
|
|
@# When the next incremental happens (level 6), the complete
|
|
@# set of 6 older incrementals (#1..6) will be deleted, since
|
|
@# that maintains the required number ($Conf{IncrKeepCnt})
|
|
@# of incrementals. This situation is reduced if you set
|
|
@# shorter chains of multi-level incrementals, eg:
|
|
@#
|
|
@# $Conf{IncrLevels} = [1, 2, 3];
|
|
@#
|
|
@# would only have up to 2 extra incremenals before all 3
|
|
@# are deleted.
|
|
@#
|
|
@# BackupPC as usual merges the full and the sequence
|
|
@# of incrementals together so each incremental can be
|
|
@# browsed and restored as though it is a complete backup.
|
|
@# If you specify a long chain of incrementals then more
|
|
@# backups need to be merged when browsing, restoring,
|
|
@# or getting the starting point for rsync backups.
|
|
@# In the example above (levels 1..6), browing backup
|
|
@# #6 requires 7 different backups (#0..6) to be merged.
|
|
@#
|
|
@# Because of this merging and the additional incrementals
|
|
@# that need to be kept, it is recommended that some
|
|
@# level 1 incrementals be included in $Conf{IncrLevels}.
|
|
@#
|
|
@# Prior to version 3.0 incrementals were always level 1,
|
|
@# meaning each incremental backed up all the files that
|
|
@# changed since the last full.
|
|
@#
|
|
@$Conf{IncrLevels} = [1];
|
|
@
|
|
@#
|
|
@# Disable all full and incremental backups. These settings are
|
|
@# useful for a client that is no longer being backed up
|
|
@# (eg: a retired machine), but you wish to keep the last
|
|
@# backups available for browsing or restoring to other machines.
|
|
@#
|
|
@# There are three values for $Conf{BackupsDisable}:
|
|
@#
|
|
@# 0 Backups are enabled.
|
|
@#
|
|
@# 1 Don't do any regular backups on this client. Manually
|
|
@# requested backups (via the CGI interface) will still occur.
|
|
@#
|
|
@# 2 Don't do any backups on this client. Manually requested
|
|
@# backups (via the CGI interface) will be ignored.
|
|
@#
|
|
@# In versions prior to 3.0 Backups were disabled by setting
|
|
@# $Conf{FullPeriod} to -1 or -2.
|
|
@#
|
|
@$Conf{BackupsDisable} = 0;
|
|
@
|
|
@#
|
|
@# A failed full backup is saved as a partial backup. The rsync
|
|
@# XferMethod can take advantage of the partial full when the next
|
|
@# backup is run. This parameter sets the age of the partial full
|
|
@# in days: if the partial backup is older than this number of
|
|
@# days, then rsync will ignore (not use) the partial full when
|
|
@# the next backup is run. If you set this to a negative value
|
|
@# then no partials will be saved. If you set this to 0, partials
|
|
@# will be saved, but will not be used by the next backup.
|
|
@#
|
|
@# The default setting of 3 days means that a partial older than
|
|
@# 3 days is ignored when the next full backup is done.
|
|
@#
|
|
@$Conf{PartialAgeMax} = 3;
|
|
@
|
|
@#
|
|
@# Whether incremental backups are filled. "Filling" means that the
|
|
@# most recent full (or filled) dump is merged into the new incremental
|
|
@# dump using hardlinks. This makes an incremental dump look like a
|
|
@# full dump. Prior to v1.03 all incremental backups were filled.
|
|
@# In v1.4.0 and later the default is off.
|
|
@#
|
|
@# BackupPC, and the cgi interface in particular, do the right thing on
|
|
@# un-filled incremental backups. It will correctly display the merged
|
|
@# incremental backup with the most recent filled backup, giving the
|
|
@# un-filled incremental backups a filled appearance. That means it
|
|
@# invisible to the user whether incremental dumps are filled or not.
|
|
@#
|
|
@# Filling backups takes a little extra disk space, and it does cost
|
|
@# some extra disk activity for filling, and later removal. Filling
|
|
@# is no longer useful, since file mangling and compression doesn't
|
|
@# make a filled backup very useful. It's likely the filling option
|
|
@# will be removed from future versions: filling will be delegated to
|
|
@# the display and extraction of backup data.
|
|
@#
|
|
@# If filling is off, BackupPC makes sure that the oldest backup is
|
|
@# a full, otherwise the following incremental backups will be
|
|
@# incomplete. This might mean an extra full backup has to be
|
|
@# kept until the following incremental backups expire.
|
|
@#
|
|
@# The default is off. You can turn this on or off at any
|
|
@# time without affecting existing backups.
|
|
@#
|
|
@$Conf{IncrFill} = 0;
|
|
@
|
|
@#
|
|
@# Number of restore logs to keep. BackupPC remembers information about
|
|
@# each restore request. This number per client will be kept around before
|
|
@# the oldest ones are pruned.
|
|
@#
|
|
@# Note: files/dirs delivered via Zip or Tar downloads don't count as
|
|
@# restores. Only the first restore option (where the files and dirs
|
|
@# are written to the host) count as restores that are logged.
|
|
@#
|
|
@$Conf{RestoreInfoKeepCnt} = 10;
|
|
@
|
|
@#
|
|
@# Number of archive logs to keep. BackupPC remembers information
|
|
@# about each archive request. This number per archive client will
|
|
@# be kept around before the oldest ones are pruned.
|
|
@#
|
|
@$Conf{ArchiveInfoKeepCnt} = 10;
|
|
@
|
|
@#
|
|
@# List of directories or files to backup. If this is defined, only these
|
|
@# directories or files will be backed up.
|
|
@#
|
|
@# For Smb, only one of $Conf{BackupFilesExclude} and $Conf{BackupFilesOnly}
|
|
@# can be specified per share. If both are set for a particular share, then
|
|
@# $Conf{BackupFilesOnly} takes precedence and $Conf{BackupFilesExclude}
|
|
@# is ignored.
|
|
@#
|
|
@# This can be set to a string, an array of strings, or, in the case
|
|
@# of multiple shares, a hash of strings or arrays. A hash is used
|
|
@# to give a list of directories or files to backup for each share
|
|
@# (the share name is the key). If this is set to just a string or
|
|
@# array, and $Conf{SmbShareName} contains multiple share names, then
|
|
@# the setting is assumed to apply all shares.
|
|
@#
|
|
@# If a hash is used, a special key "*" means it applies to all
|
|
@# shares that don't have a specific entry.
|
|
@#
|
|
@# Examples:
|
|
@# $Conf{BackupFilesOnly} = '/myFiles';
|
|
@# $Conf{BackupFilesOnly} = ['/myFiles']; # same as first example
|
|
@# $Conf{BackupFilesOnly} = ['/myFiles', '/important'];
|
|
@# $Conf{BackupFilesOnly} = {
|
|
@# 'c' => ['/myFiles', '/important'], # these are for 'c' share
|
|
@# 'd' => ['/moreFiles', '/archive'], # these are for 'd' share
|
|
@# };
|
|
@# $Conf{BackupFilesOnly} = {
|
|
@# 'c' => ['/myFiles', '/important'], # these are for 'c' share
|
|
@# '*' => ['/myFiles', '/important'], # these are other shares
|
|
@# };
|
|
@#
|
|
@$Conf{BackupFilesOnly} = undef;
|
|
@
|
|
@#
|
|
@# List of directories or files to exclude from the backup. For Smb,
|
|
@# only one of $Conf{BackupFilesExclude} and $Conf{BackupFilesOnly}
|
|
@# can be specified per share. If both are set for a particular share,
|
|
@# then $Conf{BackupFilesOnly} takes precedence and
|
|
@# $Conf{BackupFilesExclude} is ignored.
|
|
@#
|
|
@# This can be set to a string, an array of strings, or, in the case
|
|
@# of multiple shares, a hash of strings or arrays. A hash is used
|
|
@# to give a list of directories or files to exclude for each share
|
|
@# (the share name is the key). If this is set to just a string or
|
|
@# array, and $Conf{SmbShareName} contains multiple share names, then
|
|
@# the setting is assumed to apply to all shares.
|
|
@#
|
|
@# The exact behavior is determined by the underlying transport program,
|
|
@# smbclient or tar. For smbclient the exlclude file list is passed into
|
|
@# the X option. Simple shell wild-cards using "*" or "?" are allowed.
|
|
@#
|
|
@# For tar, if the exclude file contains a "/" it is assumed to be anchored
|
|
@# at the start of the string. Since all the tar paths start with "./",
|
|
@# BackupPC prepends a "." if the exclude file starts with a "/". Note
|
|
@# that GNU tar version >= 1.13.7 is required for the exclude option to
|
|
@# work correctly. For linux or unix machines you should add
|
|
@# "/proc" to $Conf{BackupFilesExclude} unless you have specified
|
|
@# --one-file-system in $Conf{TarClientCmd} or --one-file-system in
|
|
@# $Conf{RsyncArgs}. Also, for tar, do not use a trailing "/" in
|
|
@# the directory name: a trailing "/" causes the name to not match
|
|
@# and the directory will not be excluded.
|
|
@#
|
|
@# Users report that for smbclient you should specify a directory
|
|
@# followed by "/*", eg: "/proc/*", instead of just "/proc".
|
|
@#
|
|
@# If a hash is used, a special key "*" means it applies to all
|
|
@# shares that don't have a specific entry.
|
|
@#
|
|
@# Examples:
|
|
@# $Conf{BackupFilesExclude} = '/temp';
|
|
@# $Conf{BackupFilesExclude} = ['/temp']; # same as first example
|
|
@# $Conf{BackupFilesExclude} = ['/temp', '/winnt/tmp'];
|
|
@# $Conf{BackupFilesExclude} = {
|
|
@# 'c' => ['/temp', '/winnt/tmp'], # these are for 'c' share
|
|
@# 'd' => ['/junk', '/dont_back_this_up'], # these are for 'd' share
|
|
@# };
|
|
@# $Conf{BackupFilesExclude} = {
|
|
@# 'c' => ['/temp', '/winnt/tmp'], # these are for 'c' share
|
|
@# '*' => ['/junk', '/dont_back_this_up'], # these are for other shares
|
|
@# };
|
|
@#
|
|
@$Conf{BackupFilesExclude} = {
|
|
@ 'slash' => ['lost+found', 'tmp'],
|
|
@ 'var' => ['lost+found', 'cache/apt'],
|
|
@ 'usr' => ['lost+found'],
|
|
@};
|
|
@
|
|
@#
|
|
@# PCs that are always or often on the network can be backed up after
|
|
@# hours, to reduce PC, network and server load during working hours. For
|
|
@# each PC a count of consecutive good pings is maintained. Once a PC has
|
|
@# at least $Conf{BlackoutGoodCnt} consecutive good pings it is subject
|
|
@# to "blackout" and not backed up during hours and days specified by
|
|
@# $Conf{BlackoutPeriods}.
|
|
@#
|
|
@# To allow for periodic rebooting of a PC or other brief periods when a
|
|
@# PC is not on the network, a number of consecutive bad pings is allowed
|
|
@# before the good ping count is reset. This parameter is
|
|
@# $Conf{BlackoutBadPingLimit}.
|
|
@#
|
|
@# Note that bad and good pings don't occur with the same interval. If a
|
|
@# machine is always on the network, it will only be pinged roughly once
|
|
@# every $Conf{IncrPeriod} (eg: once per day). So a setting for
|
|
@# $Conf{BlackoutGoodCnt} of 7 means it will take around 7 days for a
|
|
@# machine to be subject to blackout. On the other hand, if a ping is
|
|
@# failed, it will be retried roughly every time BackupPC wakes up, eg,
|
|
@# every one or two hours. So a setting for $Conf{BlackoutBadPingLimit} of
|
|
@# 3 means that the PC will lose its blackout status after 3-6 hours of
|
|
@# unavailability.
|
|
@#
|
|
@# To disable the blackout feature set $Conf{BlackoutGoodCnt} to a negative
|
|
@# value. A value of 0 will make all machines subject to blackout. But
|
|
@# if you don't want to do any backups during the day it would be easier
|
|
@# to just set $Conf{WakeupSchedule} to a restricted schedule.
|
|
@#
|
|
@$Conf{BlackoutBadPingLimit} = 3;
|
|
@$Conf{BlackoutGoodCnt} = 7;
|
|
@
|
|
@#
|
|
@# One or more blackout periods can be specified. If a client is
|
|
@# subject to blackout then no regular (non-manual) backups will
|
|
@# be started during any of these periods. hourBegin and hourEnd
|
|
@# specify hours fro midnight and weekDays is a list of days of
|
|
@# the week where 0 is Sunday, 1 is Monday etc.
|
|
@#
|
|
@# For example:
|
|
@#
|
|
@# $Conf{BlackoutPeriods} = [
|
|
@# {
|
|
@# hourBegin => 7.0,
|
|
@# hourEnd => 19.5,
|
|
@# weekDays => [1, 2, 3, 4, 5],
|
|
@# },
|
|
@# ];
|
|
@#
|
|
@# specifies one blackout period from 7:00am to 7:30pm local time
|
|
@# on Mon-Fri.
|
|
@#
|
|
@# The blackout period can also span midnight by setting
|
|
@# hourBegin > hourEnd, eg:
|
|
@#
|
|
@# $Conf{BlackoutPeriods} = [
|
|
@# {
|
|
@# hourBegin => 7.0,
|
|
@# hourEnd => 19.5,
|
|
@# weekDays => [1, 2, 3, 4, 5],
|
|
@# },
|
|
@# {
|
|
@# hourBegin => 23,
|
|
@# hourEnd => 5,
|
|
@# weekDays => [5, 6],
|
|
@# },
|
|
@# ];
|
|
@#
|
|
@# This specifies one blackout period from 7:00am to 7:30pm local time
|
|
@# on Mon-Fri, and a second period from 11pm to 5am on Friday and
|
|
@# Saturday night.
|
|
@#
|
|
@$Conf{BlackoutPeriods} = [
|
|
@ {
|
|
@ hourBegin => 11,
|
|
@ hourEnd => 24,
|
|
@ weekDays => [0, 1, 2, 3, 4, 5, 6],
|
|
@ },
|
|
@];
|
|
@
|
|
@#
|
|
@# A backup of a share that has zero files is considered fatal. This is
|
|
@# used to catch miscellaneous Xfer errors that result in no files being
|
|
@# backed up. If you have shares that might be empty (and therefore an
|
|
@# empty backup is valid) you should set this flag to 0.
|
|
@#
|
|
@$Conf{BackupZeroFilesIsFatal} = 1;
|
|
@
|
|
@###########################################################################
|
|
@# How to backup a client
|
|
@# (can be overridden in the per-PC config.pl)
|
|
@###########################################################################
|
|
@#
|
|
@# What transport method to use to backup each host. If you have
|
|
@# a mixed set of WinXX and linux/unix hosts you will need to override
|
|
@# this in the per-PC config.pl.
|
|
@#
|
|
@# The valid values are:
|
|
@#
|
|
@# - 'smb': backup and restore via smbclient and the SMB protocol.
|
|
@# Easiest choice for WinXX.
|
|
@#
|
|
@# - 'rsync': backup and restore via rsync (via rsh or ssh).
|
|
@# Best choice for linux/unix. Good choice also for WinXX.
|
|
@#
|
|
@# - 'rsyncd': backup and restore via rsync daemon on the client.
|
|
@# Best choice for linux/unix if you have rsyncd running on
|
|
@# the client. Good choice also for WinXX.
|
|
@#
|
|
@# - 'tar': backup and restore via tar, tar over ssh, rsh or nfs.
|
|
@# Good choice for linux/unix.
|
|
@#
|
|
@# - 'archive': host is a special archive host. Backups are not done.
|
|
@# An archive host is used to archive other host's backups
|
|
@# to permanent media, such as tape, CDR or DVD.
|
|
@#
|
|
@#
|
|
@$Conf{XferMethod} = 'rsyncd';
|
|
@
|
|
@#
|
|
@# Level of verbosity in Xfer log files. 0 means be quiet, 1 will give
|
|
@# will give one line per file, 2 will also show skipped files on
|
|
@# incrementals, higher values give more output.
|
|
@#
|
|
@$Conf{XferLogLevel} = 1;
|
|
@
|
|
@#
|
|
@# Filename charset encoding on the client. BackupPC uses utf8
|
|
@# on the server for filename encoding. If this is empty, then
|
|
@# utf8 is assumed and client filenames will not be modified.
|
|
@# If set to a different encoding then filenames will converted
|
|
@# to/from utf8 automatically during backup and restore.
|
|
@#
|
|
@# If the file names displayed in the browser (eg: accents or special
|
|
@# characters) don't look right then it is likely you haven't set
|
|
@# $Conf{ClientCharset} correctly.
|
|
@#
|
|
@# If you are using smbclient on a WinXX machine, smbclient will convert
|
|
@# to the "unix charset" setting in smb.conf. The default is utf8,
|
|
@# in which case leave $Conf{ClientCharset} empty since smbclient does
|
|
@# the right conversion.
|
|
@#
|
|
@# If you are using rsync on a WinXX machine then it does no conversion.
|
|
@# A typical WinXX encoding for latin1/western europe is 'cp1252',
|
|
@# so in this case set $Conf{ClientCharset} to 'cp1252'.
|
|
@#
|
|
@# On a linux or unix client, run "locale charmap" to see the client's
|
|
@# charset. Set $Conf{ClientCharset} to this value. A typical value
|
|
@# for english/US is 'ISO-8859-1'.
|
|
@#
|
|
@# Do "perldoc Encode::Supported" to see the list of possible charset
|
|
@# values. The FAQ at http://www.cl.cam.ac.uk/~mgk25/unicode.html
|
|
@# is excellent, and http://czyborra.com/charsets/iso8859.html
|
|
@# provides more information on the iso-8859 charsets.
|
|
@#
|
|
@$Conf{ClientCharset} = '';
|
|
@
|
|
@#
|
|
@# Prior to 3.x no charset conversion was done by BackupPC. Backups were
|
|
@# stored in what ever charset the XferMethod provided - typically utf8
|
|
@# for smbclient and the client's locale settings for rsync and tar (eg:
|
|
@# cp1252 for rsync on WinXX and perhaps iso-8859-1 with rsync on linux).
|
|
@# This setting tells BackupPC the charset that was used to store file
|
|
@# names in old backups taken with BackupPC 2.x, so that non-ascii file
|
|
@# names in old backups can be viewed and restored.
|
|
@#
|
|
@$Conf{ClientCharsetLegacy} = 'iso-8859-1';
|
|
@
|
|
@#
|
|
@# Name of the host share that is backed up when using SMB. This can be a
|
|
@# string or an array of strings if there are multiple shares per host.
|
|
@# Examples:
|
|
@#
|
|
@# $Conf{SmbShareName} = 'c'; # backup 'c' share
|
|
@# $Conf{SmbShareName} = ['c', 'd']; # backup 'c' and 'd' shares
|
|
@#
|
|
@# This setting only matters if $Conf{XferMethod} = 'smb'.
|
|
@#
|
|
@$Conf{SmbShareName} = 'C$';
|
|
@
|
|
@#
|
|
@# Smbclient share user name. This is passed to smbclient's -U argument.
|
|
@#
|
|
@# This setting only matters if $Conf{XferMethod} = 'smb'.
|
|
@#
|
|
@$Conf{SmbShareUserName} = '';
|
|
@
|
|
@#
|
|
@# Smbclient share password. This is passed to smbclient via its PASSWD
|
|
@# environment variable. There are several ways you can tell BackupPC
|
|
@# the smb share password. In each case you should be very careful about
|
|
@# security. If you put the password here, make sure that this file is
|
|
@# not readable by regular users! See the "Setting up config.pl" section
|
|
@# in the documentation for more information.
|
|
@#
|
|
@# This setting only matters if $Conf{XferMethod} = 'smb'.
|
|
@#
|
|
@$Conf{SmbSharePasswd} = '';
|
|
@
|
|
@#
|
|
@# Full path for smbclient. Security caution: normal users should not
|
|
@# allowed to write to this file or directory.
|
|
@#
|
|
@# smbclient is from the Samba distribution. smbclient is used to
|
|
@# actually extract the incremental or full dump of the share filesystem
|
|
@# from the PC.
|
|
@#
|
|
@# This setting only matters if $Conf{XferMethod} = 'smb'.
|
|
@#
|
|
@$Conf{SmbClientPath} = '/usr/bin/smbclient';
|
|
@
|
|
@#
|
|
@# Command to run smbclient for a full dump.
|
|
@# This setting only matters if $Conf{XferMethod} = 'smb'.
|
|
@#
|
|
@# The following variables are substituted at run-time:
|
|
@#
|
|
@# $smbClientPath same as $Conf{SmbClientPath}
|
|
@# $host host to backup/restore
|
|
@# $hostIP host IP address
|
|
@# $shareName share name
|
|
@# $userName user name
|
|
@# $fileList list of files to backup (based on exclude/include)
|
|
@# $I_option optional -I option to smbclient
|
|
@# $X_option exclude option (if $fileList is an exclude list)
|
|
@# $timeStampFile start time for incremental dump
|
|
@#
|
|
@# Note: all Cmds are executed directly without a shell, so the prog name
|
|
@# needs to be a full path and you can't include shell syntax like
|
|
@# redirection and pipes; put that in a script if you need it.
|
|
@#
|
|
@$Conf{SmbClientFullCmd} = '$smbClientPath \\\\$host\\$shareName'
|
|
@ . ' $I_option -U $userName -E -d 1'
|
|
@ . ' -c tarmode\\ full -Tc$X_option - $fileList';
|
|
@
|
|
@#
|
|
@# Command to run smbclient for an incremental dump.
|
|
@# This setting only matters if $Conf{XferMethod} = 'smb'.
|
|
@#
|
|
@# Same variable substitutions are applied as $Conf{SmbClientFullCmd}.
|
|
@#
|
|
@# Note: all Cmds are executed directly without a shell, so the prog name
|
|
@# needs to be a full path and you can't include shell syntax like
|
|
@# redirection and pipes; put that in a script if you need it.
|
|
@#
|
|
@$Conf{SmbClientIncrCmd} = '$smbClientPath \\\\$host\\$shareName'
|
|
@ . ' $I_option -U $userName -E -d 1'
|
|
@ . ' -c tarmode\\ full -TcN$X_option $timeStampFile - $fileList';
|
|
@
|
|
@#
|
|
@# Command to run smbclient for a restore.
|
|
@# This setting only matters if $Conf{XferMethod} = 'smb'.
|
|
@#
|
|
@# Same variable substitutions are applied as $Conf{SmbClientFullCmd}.
|
|
@#
|
|
@# If your smb share is read-only then direct restores will fail.
|
|
@# You should set $Conf{SmbClientRestoreCmd} to undef and the
|
|
@# corresponding CGI restore option will be removed.
|
|
@#
|
|
@# Note: all Cmds are executed directly without a shell, so the prog name
|
|
@# needs to be a full path and you can't include shell syntax like
|
|
@# redirection and pipes; put that in a script if you need it.
|
|
@#
|
|
@$Conf{SmbClientRestoreCmd} = '$smbClientPath \\\\$host\\$shareName'
|
|
@ . ' $I_option -U $userName -E -d 1'
|
|
@ . ' -c tarmode\\ full -Tx -';
|
|
@
|
|
@#
|
|
@# Which host directories to backup when using tar transport. This can be a
|
|
@# string or an array of strings if there are multiple directories to
|
|
@# backup per host. Examples:
|
|
@#
|
|
@# $Conf{TarShareName} = '/'; # backup everything
|
|
@# $Conf{TarShareName} = '/home'; # only backup /home
|
|
@# $Conf{TarShareName} = ['/home', '/src']; # backup /home and /src
|
|
@#
|
|
@# The fact this parameter is called 'TarShareName' is for historical
|
|
@# consistency with the Smb transport options. You can use any valid
|
|
@# directory on the client: there is no need for it to correspond to
|
|
@# any Smb share or device mount point.
|
|
@#
|
|
@# Note also that you can also use $Conf{BackupFilesOnly} to specify
|
|
@# a specific list of directories to backup. It's more efficient to
|
|
@# use this option instead of $Conf{TarShareName} since a new tar is
|
|
@# run for each entry in $Conf{TarShareName}.
|
|
@#
|
|
@# On the other hand, if you add --one-file-system to $Conf{TarClientCmd}
|
|
@# you can backup each file system separately, which makes restoring one
|
|
@# bad file system easier. In this case you would list all of the mount
|
|
@# points here, since you can't get the same result with
|
|
@# $Conf{BackupFilesOnly}:
|
|
@#
|
|
@# $Conf{TarShareName} = ['/', '/var', '/data', '/boot'];
|
|
@#
|
|
@# This setting only matters if $Conf{XferMethod} = 'tar'.
|
|
@#
|
|
@$Conf{TarShareName} = '/';
|
|
@
|
|
@#
|
|
@# Full command to run tar on the client. GNU tar is required. You will
|
|
@# need to fill in the correct paths for ssh2 on the local host (server)
|
|
@# and GNU tar on the client. Security caution: normal users should not
|
|
@# allowed to write to these executable files or directories.
|
|
@#
|
|
@# See the documentation for more information about setting up ssh2 keys.
|
|
@#
|
|
@# If you plan to use NFS then tar just runs locally and ssh2 is not needed.
|
|
@# For example, assuming the client filesystem is mounted below /mnt/hostName,
|
|
@# you could use something like:
|
|
@#
|
|
@# $Conf{TarClientCmd} = '$tarPath -c -v -f - -C /mnt/$host/$shareName'
|
|
@# . ' --totals';
|
|
@#
|
|
@# In the case of NFS or rsh you need to make sure BackupPC's privileges
|
|
@# are sufficient to read all the files you want to backup. Also, you
|
|
@# will probably want to add "/proc" to $Conf{BackupFilesExclude}.
|
|
@#
|
|
@# The following variables are substituted at run-time:
|
|
@#
|
|
@# $host host name
|
|
@# $hostIP host's IP address
|
|
@# $incrDate newer-than date for incremental backups
|
|
@# $shareName share name to backup (ie: top-level directory path)
|
|
@# $fileList specific files to backup or exclude
|
|
@# $tarPath same as $Conf{TarClientPath}
|
|
@# $sshPath same as $Conf{SshPath}
|
|
@#
|
|
@# If a variable is followed by a "+" it is shell escaped. This is
|
|
@# necessary for the command part of ssh or rsh, since it ends up
|
|
@# getting passed through the shell.
|
|
@#
|
|
@# This setting only matters if $Conf{XferMethod} = 'tar'.
|
|
@#
|
|
@# Note: all Cmds are executed directly without a shell, so the prog name
|
|
@# needs to be a full path and you can't include shell syntax like
|
|
@# redirection and pipes; put that in a script if you need it.
|
|
@#
|
|
@$Conf{TarClientCmd} = '$sshPath -q -x -n -l root $host'
|
|
@ . ' env LC_ALL=C $tarPath -c -v -f - -C $shareName+'
|
|
@ . ' --totals';
|
|
@
|
|
@#
|
|
@# Extra tar arguments for full backups. Several variables are substituted at
|
|
@# run-time. See $Conf{TarClientCmd} for the list of variable substitutions.
|
|
@#
|
|
@# If you are running tar locally (ie: without rsh or ssh) then remove the
|
|
@# "+" so that the argument is no longer shell escaped.
|
|
@#
|
|
@# This setting only matters if $Conf{XferMethod} = 'tar'.
|
|
@#
|
|
@$Conf{TarFullArgs} = '$fileList+';
|
|
@
|
|
@#
|
|
@# Extra tar arguments for incr backups. Several variables are substituted at
|
|
@# run-time. See $Conf{TarClientCmd} for the list of variable substitutions.
|
|
@#
|
|
@# Note that GNU tar has several methods for specifying incremental backups,
|
|
@# including:
|
|
@#
|
|
@# --newer-mtime $incrDate+
|
|
@# This causes a file to be included if the modification time is
|
|
@# later than $incrDate (meaning its contents might have changed).
|
|
@# But changes in the ownership or modes will not qualify the
|
|
@# file to be included in an incremental.
|
|
@#
|
|
@# --newer=$incrDate+
|
|
@# This causes the file to be included if any attribute of the
|
|
@# file is later than $incrDate, meaning either attributes or
|
|
@# the modification time. This is the default method. Do
|
|
@# not use --atime-preserve in $Conf{TarClientCmd} above,
|
|
@# otherwise resetting the atime (access time) counts as an
|
|
@# attribute change, meaning the file will always be included
|
|
@# in each new incremental dump.
|
|
@#
|
|
@# If you are running tar locally (ie: without rsh or ssh) then remove the
|
|
@# "+" so that the argument is no longer shell escaped.
|
|
@#
|
|
@# This setting only matters if $Conf{XferMethod} = 'tar'.
|
|
@#
|
|
@$Conf{TarIncrArgs} = '--newer=$incrDate+ $fileList+';
|
|
@
|
|
@#
|
|
@# Full command to run tar for restore on the client. GNU tar is required.
|
|
@# This can be the same as $Conf{TarClientCmd}, with tar's -c replaced by -x
|
|
@# and ssh's -n removed.
|
|
@#
|
|
@# See $Conf{TarClientCmd} for full details.
|
|
@#
|
|
@# This setting only matters if $Conf{XferMethod} = "tar".
|
|
@#
|
|
@# If you want to disable direct restores using tar, you should set
|
|
@# $Conf{TarClientRestoreCmd} to undef and the corresponding CGI
|
|
@# restore option will be removed.
|
|
@#
|
|
@# Note: all Cmds are executed directly without a shell, so the prog name
|
|
@# needs to be a full path and you can't include shell syntax like
|
|
@# redirection and pipes; put that in a script if you need it.
|
|
@#
|
|
@$Conf{TarClientRestoreCmd} = '$sshPath -q -x -l root $host'
|
|
@ . ' env LC_ALL=C $tarPath -x -p --numeric-owner --same-owner'
|
|
@ . ' -v -f - -C $shareName+';
|
|
@
|
|
@#
|
|
@# Full path for tar on the client. Security caution: normal users should not
|
|
@# allowed to write to this file or directory.
|
|
@#
|
|
@# This setting only matters if $Conf{XferMethod} = 'tar'.
|
|
@#
|
|
@$Conf{TarClientPath} = '/bin/tar';
|
|
@
|
|
@#
|
|
@# Path to rsync executable on the client
|
|
@#
|
|
@$Conf{RsyncClientPath} = '/usr/bin/rsync';
|
|
@
|
|
@#
|
|
@# Full command to run rsync on the client machine. The following variables
|
|
@# are substituted at run-time:
|
|
@#
|
|
@# $host host name being backed up
|
|
@# $hostIP host's IP address
|
|
@# $shareName share name to backup (ie: top-level directory path)
|
|
@# $rsyncPath same as $Conf{RsyncClientPath}
|
|
@# $sshPath same as $Conf{SshPath}
|
|
@# $argList argument list, built from $Conf{RsyncArgs},
|
|
@# $shareName, $Conf{BackupFilesExclude} and
|
|
@# $Conf{BackupFilesOnly}
|
|
@#
|
|
@# This setting only matters if $Conf{XferMethod} = 'rsync'.
|
|
@#
|
|
@$Conf{RsyncClientCmd} = '$sshPath -q -x -l root $host $rsyncPath $argList+';
|
|
@
|
|
@#
|
|
@# Full command to run rsync for restore on the client. The following
|
|
@# variables are substituted at run-time:
|
|
@#
|
|
@# $host host name being backed up
|
|
@# $hostIP host's IP address
|
|
@# $shareName share name to backup (ie: top-level directory path)
|
|
@# $rsyncPath same as $Conf{RsyncClientPath}
|
|
@# $sshPath same as $Conf{SshPath}
|
|
@# $argList argument list, built from $Conf{RsyncArgs},
|
|
@# $shareName, $Conf{BackupFilesExclude} and
|
|
@# $Conf{BackupFilesOnly}
|
|
@#
|
|
@# This setting only matters if $Conf{XferMethod} = 'rsync'.
|
|
@#
|
|
@# Note: all Cmds are executed directly without a shell, so the prog name
|
|
@# needs to be a full path and you can't include shell syntax like
|
|
@# redirection and pipes; put that in a script if you need it.
|
|
@#
|
|
@$Conf{RsyncClientRestoreCmd} = '$sshPath -q -x -l root $host $rsyncPath $argList+';
|
|
@
|
|
@#
|
|
@# Share name to backup. For $Conf{XferMethod} = "rsync" this should
|
|
@# be a file system path, eg '/' or '/home'.
|
|
@#
|
|
@# For $Conf{XferMethod} = "rsyncd" this should be the name of the module
|
|
@# to backup (ie: the name from /etc/rsynd.conf).
|
|
@#
|
|
@# This can also be a list of multiple file system paths or modules.
|
|
@# For example, by adding --one-file-system to $Conf{RsyncArgs} you
|
|
@# can backup each file system separately, which makes restoring one
|
|
@# bad file system easier. In this case you would list all of the mount
|
|
@# points:
|
|
@#
|
|
@# $Conf{RsyncShareName} = ['/', '/var', '/data', '/boot'];
|
|
@#
|
|
@$Conf{RsyncShareName} = 'slash';
|
|
@
|
|
@#
|
|
@# Rsync daemon port on the client, for $Conf{XferMethod} = "rsyncd".
|
|
@#
|
|
@$Conf{RsyncdClientPort} = 873;
|
|
@
|
|
@#
|
|
@# Rsync daemon user name on client, for $Conf{XferMethod} = "rsyncd".
|
|
@# The user name and password are stored on the client in whatever file
|
|
@# the "secrets file" parameter in rsyncd.conf points to
|
|
@# (eg: /etc/rsyncd.secrets).
|
|
@#
|
|
@$Conf{RsyncdUserName} = 'backupcrans';
|
|
@
|
|
@#
|
|
@# Rsync daemon user name on client, for $Conf{XferMethod} = "rsyncd".
|
|
@# The user name and password are stored on the client in whatever file
|
|
@# the "secrets file" parameter in rsyncd.conf points to
|
|
@# (eg: /etc/rsyncd.secrets).
|
|
@#
|
|
@#$Conf{RsyncdPasswd} = '';
|
|
@
|
|
print "$Conf{RsyncdPasswd} = '%s';" % secrets.backuppc_RsyncdPasswd
|
|
@
|
|
@#
|
|
@# Whether authentication is mandatory when connecting to the client's
|
|
@# rsyncd. By default this is on, ensuring that BackupPC will refuse to
|
|
@# connect to an rsyncd on the client that is not password protected.
|
|
@# Turn off at your own risk.
|
|
@#
|
|
@$Conf{RsyncdAuthRequired} = 1;
|
|
@
|
|
@#
|
|
@# When rsync checksum caching is enabled (by adding the
|
|
@# --checksum-seed=32761 option to $Conf{RsyncArgs}), the cached
|
|
@# checksums can be occasionally verified to make sure the file
|
|
@# contents matches the cached checksums. This is to avoid the
|
|
@# risk that disk problems might cause the pool file contents to
|
|
@# get corrupted, but the cached checksums would make BackupPC
|
|
@# think that the file still matches the client.
|
|
@#
|
|
@# This setting is the probability (0 means never and 1 means always)
|
|
@# that a file will be rechecked. Setting it to 0 means the checksums
|
|
@# will not be rechecked (unless there is a phase 0 failure). Setting
|
|
@# it to 1 (ie: 100%) means all files will be checked, but that is
|
|
@# not a desirable setting since you are better off simply turning
|
|
@# caching off (ie: remove the --checksum-seed option).
|
|
@#
|
|
@# The default of 0.01 means 1% (on average) of the files during a full
|
|
@# backup will have their cached checksum re-checked.
|
|
@#
|
|
@# This setting has no effect unless checksum caching is turned on.
|
|
@#
|
|
@$Conf{RsyncCsumCacheVerifyProb} = 0.01;
|
|
@
|
|
@#
|
|
@# Arguments to rsync for backup. Do not edit the first set unless you
|
|
@# have a thorough understanding of how File::RsyncP works.
|
|
@#
|
|
@# Examples of additional arguments that should work are --exclude/--include,
|
|
@# eg:
|
|
@#
|
|
@# $Conf{RsyncArgs} = [
|
|
@# # original arguments here
|
|
@# '-v',
|
|
@# '--exclude', '/proc',
|
|
@# '--exclude', '*.tmp',
|
|
@# ];
|
|
@#
|
|
@$Conf{RsyncArgs} = [
|
|
@ #
|
|
@ # Do not edit these!
|
|
@ #
|
|
@ '--numeric-ids',
|
|
@ '--perms',
|
|
@ '--owner',
|
|
@ '--group',
|
|
@ '-D',
|
|
@ '--links',
|
|
@ '--hard-links',
|
|
@ '--times',
|
|
@ '--block-size=2048',
|
|
@ '--recursive',
|
|
@
|
|
@ #
|
|
@ # Rsync >= 2.6.3 supports the --checksum-seed option
|
|
@ # which allows rsync checksum caching on the server.
|
|
@ # Uncomment this to enable rsync checksum caching if
|
|
@ # you have a recent client rsync version and you want
|
|
@ # to enable checksum caching.
|
|
@ #
|
|
@ '--checksum-seed=32761',
|
|
@
|
|
@ #
|
|
@ # Add additional arguments here
|
|
@ #
|
|
@ '--one-file-system',
|
|
@];
|
|
@
|
|
@#
|
|
@# Arguments to rsync for restore. Do not edit the first set unless you
|
|
@# have a thorough understanding of how File::RsyncP works.
|
|
@#
|
|
@# If you want to disable direct restores using rsync (eg: is the module
|
|
@# is read-only), you should set $Conf{RsyncRestoreArgs} to undef and
|
|
@# the corresponding CGI restore option will be removed.
|
|
@#
|
|
@$Conf{RsyncRestoreArgs} = [
|
|
@ #
|
|
@ # Do not edit these!
|
|
@ #
|
|
@ '--numeric-ids',
|
|
@ '--perms',
|
|
@ '--owner',
|
|
@ '--group',
|
|
@ '-D',
|
|
@ '--links',
|
|
@ '--hard-links',
|
|
@ '--times',
|
|
@ '--block-size=2048',
|
|
@ '--relative',
|
|
@ '--ignore-times',
|
|
@ '--recursive',
|
|
@
|
|
@ #
|
|
@ # Rsync >= 2.6.3 supports the --checksum-seed option
|
|
@ # which allows rsync checksum caching on the server.
|
|
@ # Uncomment this to enable rsync checksum caching if
|
|
@ # you have a recent client rsync version and you want
|
|
@ # to enable checksum caching.
|
|
@ #
|
|
@ #'--checksum-seed=32761',
|
|
@
|
|
@ #
|
|
@ # Add additional arguments here
|
|
@ #
|
|
@ '--one-file-system',
|
|
@];
|
|
@
|
|
@#
|
|
@# Share name to backup. For $Conf{XferMethod} = "backuppcd" this should
|
|
@# be a file system path, eg '/' or '/home'.
|
|
@#
|
|
@# This can also be a list of multiple file system paths or modules.
|
|
@# (Can it??)
|
|
@#
|
|
@# $Conf{BackupPCdShareName} = ['/', '/var', '/data', '/boot'];
|
|
@#
|
|
@$Conf{BackupPCdShareName} = '/';
|
|
@
|
|
@#
|
|
@# Path to backuppcd executable on the server
|
|
@#
|
|
@$Conf{BackupPCdPath} = '';
|
|
@
|
|
@#
|
|
@# Full command to run backuppcd on the server to backup a given
|
|
@# client machine. The following variables are substituted at
|
|
@# run-time (TODO: update this list)
|
|
@#
|
|
@# $host host name being backed up
|
|
@# $hostIP host's IP address
|
|
@# $shareName share name to backup (ie: top-level directory path)
|
|
@# $backuppcdPath same as $Conf{BackupPCdPath}
|
|
@# $sshPath same as $Conf{SshPath}
|
|
@#
|
|
@# This setting only matters if $Conf{XferMethod} = 'backuppcd'.
|
|
@#
|
|
@# Arguments to backupcpd are:
|
|
@#
|
|
@# - the host name to backup
|
|
@# - the share name to backup
|
|
@# - the directory where the pool is
|
|
@# - the directory where the last run was (NOT DONE YET)
|
|
@# - a boolean value indicating whether or not the pool is
|
|
@# compressed or not
|
|
@# - the directory where the new run should occur (currently it assumes ".")
|
|
@#
|
|
@$Conf{BackupPCdCmd} = '$bpcdPath $host $shareName $poolDir XXXX $poolCompress $topDir/pc/$client/new';
|
|
@
|
|
@#
|
|
@# Full command to run backuppcd on the server for restore to a
|
|
@# client machine. The following variables are substituted at
|
|
@# run-time (TODO: update this list)
|
|
@#
|
|
@# $host host name being backed up
|
|
@# $hostIP host's IP address
|
|
@# $shareName share name to backup (ie: top-level directory path)
|
|
@# $backuppcdPath same as $Conf{BackupPCdPath}
|
|
@# $sshPath same as $Conf{SshPath}
|
|
@#
|
|
@# This setting only matters if $Conf{XferMethod} = 'backuppcd'.
|
|
@#
|
|
@# Note: all Cmds are executed directly without a shell, so the prog name
|
|
@# needs to be a full path and you can't include shell syntax like
|
|
@# redirection and pipes; put that in a script if you need it.
|
|
@#
|
|
@$Conf{BackupPCdRestoreCmd} = '$bpcdPath TODO';
|
|
@
|
|
@
|
|
@#
|
|
@# Archive Destination
|
|
@#
|
|
@# The Destination of the archive
|
|
@# e.g. /tmp for file archive or /dev/nst0 for device archive
|
|
@#
|
|
@$Conf{ArchiveDest} = '/tmp';
|
|
@
|
|
@#
|
|
@# Archive Compression type
|
|
@#
|
|
@# The valid values are:
|
|
@#
|
|
@# - 'none': No Compression
|
|
@#
|
|
@# - 'gzip': Medium Compression. Recommended.
|
|
@#
|
|
@# - 'bzip2': High Compression but takes longer.
|
|
@#
|
|
@$Conf{ArchiveComp} = 'gzip';
|
|
@
|
|
@#
|
|
@# Archive Parity Files
|
|
@#
|
|
@# The amount of Parity data to generate, as a percentage
|
|
@# of the archive size.
|
|
@# Uses the commandline par2 (par2cmdline) available from
|
|
@# http://parchive.sourceforge.net
|
|
@#
|
|
@# Only useful for file dumps.
|
|
@#
|
|
@# Set to 0 to disable this feature.
|
|
@#
|
|
@$Conf{ArchivePar} = 0;
|
|
@
|
|
@#
|
|
@# Archive Size Split
|
|
@#
|
|
@# Only for file archives. Splits the output into
|
|
@# the specified size * 1,000,000.
|
|
@# e.g. to split into 650,000,000 bytes, specify 650 below.
|
|
@#
|
|
@# If the value is 0, or if $Conf{ArchiveDest} is an existing file or
|
|
@# device (e.g. a streaming tape drive), this feature is disabled.
|
|
@#
|
|
@$Conf{ArchiveSplit} = 0;
|
|
@
|
|
@#
|
|
@# Archive Command
|
|
@#
|
|
@# This is the command that is called to actually run the archive process
|
|
@# for each host. The following variables are substituted at run-time:
|
|
@#
|
|
@# $Installdir The installation directory of BackupPC
|
|
@# $tarCreatePath The path to BackupPC_tarCreate
|
|
@# $splitpath The path to the split program
|
|
@# $parpath The path to the par2 program
|
|
@# $host The host to archive
|
|
@# $backupnumber The backup number of the host to archive
|
|
@# $compression The path to the compression program
|
|
@# $compext The extension assigned to the compression type
|
|
@# $splitsize The number of bytes to split archives into
|
|
@# $archiveloc The location to put the archive
|
|
@# $parfile The amount of parity data to create (percentage)
|
|
@#
|
|
@# Note: all Cmds are executed directly without a shell, so the prog name
|
|
@# needs to be a full path and you can't include shell syntax like
|
|
@# redirection and pipes; put that in a script if you need it.
|
|
@#
|
|
@$Conf{ArchiveClientCmd} = '$Installdir/bin/BackupPC_archiveHost'
|
|
@ . ' $tarCreatePath $splitpath $parpath $host $backupnumber'
|
|
@ . ' $compression $compext $splitsize $archiveloc $parfile *';
|
|
@
|
|
@#
|
|
@# Full path for ssh. Security caution: normal users should not
|
|
@# allowed to write to this file or directory.
|
|
@#
|
|
@$Conf{SshPath} = '/usr/bin/ssh' if -x '/usr/bin/ssh';
|
|
@
|
|
@#
|
|
@# Full path for nmblookup. Security caution: normal users should not
|
|
@# allowed to write to this file or directory.
|
|
@#
|
|
@# nmblookup is from the Samba distribution. nmblookup is used to get the
|
|
@# netbios name, necessary for DHCP hosts.
|
|
@#
|
|
@$Conf{NmbLookupPath} = '/usr/bin/nmblookup';
|
|
@
|
|
@#
|
|
@# NmbLookup command. Given an IP address, does an nmblookup on that
|
|
@# IP address. The following variables are substituted at run-time:
|
|
@#
|
|
@# $nmbLookupPath path to nmblookup ($Conf{NmbLookupPath})
|
|
@# $host IP address
|
|
@#
|
|
@# This command is only used for DHCP hosts: given an IP address, this
|
|
@# command should try to find its NetBios name.
|
|
@#
|
|
@# Note: all Cmds are executed directly without a shell, so the prog name
|
|
@# needs to be a full path and you can't include shell syntax like
|
|
@# redirection and pipes; put that in a script if you need it.
|
|
@#
|
|
@$Conf{NmbLookupCmd} = '$nmbLookupPath -A $host';
|
|
@
|
|
@#
|
|
@# NmbLookup command. Given a netbios name, finds that host by doing
|
|
@# a NetBios lookup. Several variables are substituted at run-time:
|
|
@#
|
|
@# $nmbLookupPath path to nmblookup ($Conf{NmbLookupPath})
|
|
@# $host NetBios name
|
|
@#
|
|
@# In some cases you might need to change the broadcast address, for
|
|
@# example if nmblookup uses 192.168.255.255 by default and you find
|
|
@# that doesn't work, try 192.168.1.255 (or your equivalent class C
|
|
@# address) using the -B option:
|
|
@#
|
|
@# $Conf{NmbLookupFindHostCmd} = '$nmbLookupPath -B 192.168.1.255 $host';
|
|
@#
|
|
@# If you use a WINS server and your machines don't respond to
|
|
@# multicast NetBios requests you can use this (replace 1.2.3.4
|
|
@# with the IP address of your WINS server):
|
|
@#
|
|
@# $Conf{NmbLookupFindHostCmd} = '$nmbLookupPath -R -U 1.2.3.4 $host';
|
|
@#
|
|
@# This is preferred over multicast since it minimizes network traffic.
|
|
@#
|
|
@# Experiment manually for your site to see what form of nmblookup command
|
|
@# works.
|
|
@#
|
|
@# Note: all Cmds are executed directly without a shell, so the prog name
|
|
@# needs to be a full path and you can't include shell syntax like
|
|
@# redirection and pipes; put that in a script if you need it.
|
|
@#
|
|
@$Conf{NmbLookupFindHostCmd} = '$nmbLookupPath $host';
|
|
@
|
|
@#
|
|
@# For fixed IP address hosts, BackupPC_dump can also verify the netbios
|
|
@# name to ensure it matches the host name. An error is generated if
|
|
@# they do not match. Typically this flag is off. But if you are going
|
|
@# to transition a bunch of machines from fixed host addresses to DHCP,
|
|
@# setting this flag is a great way to verify that the machines have
|
|
@# their netbios name set correctly before turning on DCHP.
|
|
@#
|
|
@$Conf{FixedIPNetBiosNameCheck} = 0;
|
|
@
|
|
@#
|
|
@# Full path to the ping command. Security caution: normal users
|
|
@# should not be allowed to write to this file or directory.
|
|
@#
|
|
@# If you want to disable ping checking, set this to some program
|
|
@# that exits with 0 status, eg:
|
|
@#
|
|
@# $Conf{PingPath} = '/bin/echo';
|
|
@#
|
|
@$Conf{PingPath} = '/bin/ping';
|
|
@
|
|
@#
|
|
@# Ping command. The following variables are substituted at run-time:
|
|
@#
|
|
@# $pingPath path to ping ($Conf{PingPath})
|
|
@# $host host name
|
|
@#
|
|
@# Wade Brown reports that on solaris 2.6 and 2.7 ping -s returns the wrong
|
|
@# exit status (0 even on failure). Replace with "ping $host 1", which
|
|
@# gets the correct exit status but we don't get the round-trip time.
|
|
@#
|
|
@# Note: all Cmds are executed directly without a shell, so the prog name
|
|
@# needs to be a full path and you can't include shell syntax like
|
|
@# redirection and pipes; put that in a script if you need it.
|
|
@#
|
|
@$Conf{PingCmd} = '$pingPath -c 1 $host';
|
|
@
|
|
@#
|
|
@# Maximum round-trip ping time in milliseconds. This threshold is set
|
|
@# to avoid backing up PCs that are remotely connected through WAN or
|
|
@# dialup connections. The output from ping -s (assuming it is supported
|
|
@# on your system) is used to check the round-trip packet time. On your
|
|
@# local LAN round-trip times should be much less than 20msec. On most
|
|
@# WAN or dialup connections the round-trip time will be typically more
|
|
@# than 20msec. Tune if necessary.
|
|
@#
|
|
@$Conf{PingMaxMsec} = 20;
|
|
@
|
|
@#
|
|
@# Compression level to use on files. 0 means no compression. Compression
|
|
@# levels can be from 1 (least cpu time, slightly worse compression) to
|
|
@# 9 (most cpu time, slightly better compression). The recommended value
|
|
@# is 3. Changing to 5, for example, will take maybe 20% more cpu time
|
|
@# and will get another 2-3% additional compression. See the zlib
|
|
@# documentation for more information about compression levels.
|
|
@#
|
|
@# Changing compression on or off after backups have already been done
|
|
@# will require both compressed and uncompressed pool files to be stored.
|
|
@# This will increase the pool storage requirements, at least until all
|
|
@# the old backups expire and are deleted.
|
|
@#
|
|
@# It is ok to change the compression value (from one non-zero value to
|
|
@# another non-zero value) after dumps are already done. Since BackupPC
|
|
@# matches pool files by comparing the uncompressed versions, it will still
|
|
@# correctly match new incoming files against existing pool files. The
|
|
@# new compression level will take effect only for new files that are
|
|
@# newly compressed and added to the pool.
|
|
@#
|
|
@# If compression was off and you are enabling compression for the first
|
|
@# time you can use the BackupPC_compressPool utility to compress the
|
|
@# pool. This avoids having the pool grow to accommodate both compressed
|
|
@# and uncompressed backups. See the documentation for more information.
|
|
@#
|
|
@# Note: compression needs the Compress::Zlib perl library. If the
|
|
@# Compress::Zlib library can't be found then $Conf{CompressLevel} is
|
|
@# forced to 0 (compression off).
|
|
@#
|
|
@$Conf{CompressLevel} = 3;
|
|
@
|
|
@#
|
|
@# Timeout in seconds when listening for the transport program's
|
|
@# (smbclient, tar etc) stdout. If no output is received during this
|
|
@# time, then it is assumed that something has wedged during a backup,
|
|
@# and the backup is terminated.
|
|
@#
|
|
@# Note that stdout buffering combined with huge files being backed up
|
|
@# could cause longish delays in the output from smbclient that
|
|
@# BackupPC_dump sees, so in rare cases you might want to increase
|
|
@# this value.
|
|
@#
|
|
@# Despite the name, this parameter sets the timeout for all transport
|
|
@# methods (tar, smb etc).
|
|
@#
|
|
@$Conf{ClientTimeout} = 7200;
|
|
@
|
|
@#
|
|
@# Maximum number of log files we keep around in each PC's directory
|
|
@# (ie: pc/$host). These files are aged monthly. A setting of 12
|
|
@# means there will be at most the files LOG, LOG.0, LOG.1, ... LOG.11
|
|
@# in the pc/$host directory (ie: about a years worth). (Except this
|
|
@# month's LOG, these files will have a .z extension if compression
|
|
@# is on).
|
|
@#
|
|
@# If you decrease this number after BackupPC has been running for a
|
|
@# while you will have to manually remove the older log files.
|
|
@#
|
|
@$Conf{MaxOldPerPCLogFiles} = 12;
|
|
@
|
|
@#
|
|
@# Optional commands to run before and after dumps and restores,
|
|
@# and also before and after each share of a dump.
|
|
@#
|
|
@# Stdout from these commands will be written to the Xfer (or Restore)
|
|
@# log file. One example of using these commands would be to
|
|
@# shut down and restart a database server, dump a database
|
|
@# to files for backup, or doing a snapshot of a share prior
|
|
@# to a backup. Example:
|
|
@#
|
|
@# $Conf{DumpPreUserCmd} = '$sshPath -q -x -l root $host /usr/bin/dumpMysql';
|
|
@#
|
|
@# The following variable substitutions are made at run time for
|
|
@# $Conf{DumpPreUserCmd}, $Conf{DumpPostUserCmd}, $Conf{DumpPreShareCmd}
|
|
@# and $Conf{DumpPostShareCmd}:
|
|
@#
|
|
@# $type type of dump (incr or full)
|
|
@# $xferOK 1 if the dump succeeded, 0 if it didn't
|
|
@# $client client name being backed up
|
|
@# $host host name (could be different from client name if
|
|
@# $Conf{ClientNameAlias} is set)
|
|
@# $hostIP IP address of host
|
|
@# $user user name from the hosts file
|
|
@# $moreUsers list of additional users from the hosts file
|
|
@# $share the first share name (or current share for
|
|
@# $Conf{DumpPreShareCmd} and $Conf{DumpPostShareCmd})
|
|
@# $shares list of all the share names
|
|
@# $XferMethod value of $Conf{XferMethod} (eg: tar, rsync, smb)
|
|
@# $sshPath value of $Conf{SshPath},
|
|
@# $cmdType set to DumpPreUserCmd or DumpPostUserCmd
|
|
@#
|
|
@# The following variable substitutions are made at run time for
|
|
@# $Conf{RestorePreUserCmd} and $Conf{RestorePostUserCmd}:
|
|
@#
|
|
@# $client client name being backed up
|
|
@# $xferOK 1 if the restore succeeded, 0 if it didn't
|
|
@# $host host name (could be different from client name if
|
|
@# $Conf{ClientNameAlias} is set)
|
|
@# $hostIP IP address of host
|
|
@# $user user name from the hosts file
|
|
@# $moreUsers list of additional users from the hosts file
|
|
@# $share the first share name
|
|
@# $XferMethod value of $Conf{XferMethod} (eg: tar, rsync, smb)
|
|
@# $sshPath value of $Conf{SshPath},
|
|
@# $type set to "restore"
|
|
@# $bkupSrcHost host name of the restore source
|
|
@# $bkupSrcShare share name of the restore source
|
|
@# $bkupSrcNum backup number of the restore source
|
|
@# $pathHdrSrc common starting path of restore source
|
|
@# $pathHdrDest common starting path of destination
|
|
@# $fileList list of files being restored
|
|
@# $cmdType set to RestorePreUserCmd or RestorePostUserCmd
|
|
@#
|
|
@# The following variable substitutions are made at run time for
|
|
@# $Conf{ArchivePreUserCmd} and $Conf{ArchivePostUserCmd}:
|
|
@#
|
|
@# $client client name being backed up
|
|
@# $xferOK 1 if the archive succeeded, 0 if it didn't
|
|
@# $host Name of the archive host
|
|
@# $user user name from the hosts file
|
|
@# $share the first share name
|
|
@# $XferMethod value of $Conf{XferMethod} (eg: tar, rsync, smb)
|
|
@# $HostList list of hosts being archived
|
|
@# $BackupList list of backup numbers for the hosts being archived
|
|
@# $archiveloc location where the archive is sent to
|
|
@# $parfile amount of parity data being generated (percentage)
|
|
@# $compression compression program being used (eg: cat, gzip, bzip2)
|
|
@# $compext extension used for compression type (eg: raw, gz, bz2)
|
|
@# $splitsize size of the files that the archive creates
|
|
@# $sshPath value of $Conf{SshPath},
|
|
@# $type set to "archive"
|
|
@# $cmdType set to ArchivePreUserCmd or ArchivePostUserCmd
|
|
@#
|
|
@# Note: all Cmds are executed directly without a shell, so the prog name
|
|
@# needs to be a full path and you can't include shell syntax like
|
|
@# redirection and pipes; put that in a script if you need it.
|
|
@#
|
|
@$Conf{DumpPreUserCmd} = undef;
|
|
@$Conf{DumpPostUserCmd} = undef;
|
|
@$Conf{DumpPreShareCmd} = undef;
|
|
@$Conf{DumpPostShareCmd} = undef;
|
|
@$Conf{RestorePreUserCmd} = undef;
|
|
@$Conf{RestorePostUserCmd} = undef;
|
|
@$Conf{ArchivePreUserCmd} = undef;
|
|
@$Conf{ArchivePostUserCmd} = undef;
|
|
@
|
|
@#
|
|
@# Whether the exit status of each PreUserCmd and
|
|
@# PostUserCmd is checked.
|
|
@#
|
|
@# If set and the Dump/Restore/Archive Pre/Post UserCmd
|
|
@# returns a non-zero exit status then the dump/restore/archive
|
|
@# is aborted. To maintain backward compatibility (where
|
|
@# the exit status in early versions was always ignored),
|
|
@# this flag defaults to 0.
|
|
@#
|
|
@# If this flag is set and the Dump/Restore/Archive PreUserCmd
|
|
@# fails then the matching Dump/Restore/Archive PostUserCmd is
|
|
@# not executed. If DumpPreShareCmd returns a non-exit status,
|
|
@# then DumpPostShareCmd is not executed, but the DumpPostUserCmd
|
|
@# is still run (since DumpPreUserCmd must have previously
|
|
@# succeeded).
|
|
@#
|
|
@# An example of a DumpPreUserCmd that might fail is a script
|
|
@# that snapshots or dumps a database which fails because
|
|
@# of some database error.
|
|
@#
|
|
@$Conf{UserCmdCheckStatus} = 0;
|
|
@
|
|
@#
|
|
@# Override the client's host name. This allows multiple clients
|
|
@# to all refer to the same physical host. This should only be
|
|
@# set in the per-PC config file and is only used by BackupPC at
|
|
@# the last moment prior to generating the command used to backup
|
|
@# that machine (ie: the value of $Conf{ClientNameAlias} is invisible
|
|
@# everywhere else in BackupPC). The setting can be a host name or
|
|
@# IP address, eg:
|
|
@#
|
|
@# $Conf{ClientNameAlias} = 'realHostName';
|
|
@# $Conf{ClientNameAlias} = '192.1.1.15';
|
|
@#
|
|
@# will cause the relevant smb/tar/rsync backup/restore commands to be
|
|
@# directed to realHostName, not the client name.
|
|
@#
|
|
@# Note: this setting doesn't work for hosts with DHCP set to 1.
|
|
@#
|
|
@$Conf{ClientNameAlias} = undef;
|
|
@
|
|
@###########################################################################
|
|
@# Email reminders, status and messages
|
|
@# (can be overridden in the per-PC config.pl)
|
|
@###########################################################################
|
|
@#
|
|
@# Full path to the sendmail command. Security caution: normal users
|
|
@# should not allowed to write to this file or directory.
|
|
@#
|
|
@$Conf{SendmailPath} = '/usr/sbin/sendmail';
|
|
@
|
|
@#
|
|
@# Minimum period between consecutive emails to a single user.
|
|
@# This tries to keep annoying email to users to a reasonable
|
|
@# level. Email checks are done nightly, so this number is effectively
|
|
@# rounded up (ie: 2.5 means a user will never receive email more
|
|
@# than once every 3 days).
|
|
@#
|
|
@$Conf{EMailNotifyMinDays} = 2.5;
|
|
@
|
|
@#
|
|
@# Name to use as the "from" name for email. Depending upon your mail
|
|
@# handler this is either a plain name (eg: "admin") or a fully-qualified
|
|
@# name (eg: "admin@mydomain.com").
|
|
@#
|
|
@$Conf{EMailFromUserName} = 'backuppc@crans.org';
|
|
@
|
|
@#
|
|
@# Destination address to an administrative user who will receive a
|
|
@# nightly email with warnings and errors. If there are no warnings
|
|
@# or errors then no email will be sent. Depending upon your mail
|
|
@# handler this is either a plain name (eg: "admin") or a fully-qualified
|
|
@# name (eg: "admin@mydomain.com").
|
|
@#
|
|
@$Conf{EMailAdminUserName} = 'backuppc@crans.org';
|
|
@
|
|
@#
|
|
@# Destination domain name for email sent to users. By default
|
|
@# this is empty, meaning email is sent to plain, unqualified
|
|
@# addresses. Otherwise, set it to the destintation domain, eg:
|
|
@#
|
|
@# $Cong{EMailUserDestDomain} = '@mydomain.com';
|
|
@#
|
|
@# With this setting user email will be set to 'user@mydomain.com'.
|
|
@#
|
|
@$Conf{EMailUserDestDomain} = '@crans.org';
|
|
@
|
|
@#
|
|
@# This subject and message is sent to a user if their PC has never been
|
|
@# backed up.
|
|
@#
|
|
@# These values are language-dependent. The default versions can be
|
|
@# found in the language file (eg: lib/BackupPC/Lang/en.pm). If you
|
|
@# need to change the message, copy it here and edit it, eg:
|
|
@#
|
|
@# $Conf{EMailNoBackupEverMesg} = <<'EOF';
|
|
@# To: $user$domain
|
|
@# cc:
|
|
@# Subject: $subj
|
|
@#
|
|
@# Dear $userName,
|
|
@#
|
|
@# This is a site-specific email message.
|
|
@# EOF
|
|
@#
|
|
@$Conf{EMailNoBackupEverSubj} = undef;
|
|
@$Conf{EMailNoBackupEverMesg} = undef;
|
|
@
|
|
@#
|
|
@# How old the most recent backup has to be before notifying user.
|
|
@# When there have been no backups in this number of days the user
|
|
@# is sent an email.
|
|
@#
|
|
@$Conf{EMailNotifyOldBackupDays} = 7.0;
|
|
@
|
|
@#
|
|
@# This subject and message is sent to a user if their PC has not recently
|
|
@# been backed up (ie: more than $Conf{EMailNotifyOldBackupDays} days ago).
|
|
@#
|
|
@# These values are language-dependent. The default versions can be
|
|
@# found in the language file (eg: lib/BackupPC/Lang/en.pm). If you
|
|
@# need to change the message, copy it here and edit it, eg:
|
|
@#
|
|
@# $Conf{EMailNoBackupRecentMesg} = <<'EOF';
|
|
@# To: $user$domain
|
|
@# cc:
|
|
@# Subject: $subj
|
|
@#
|
|
@# Dear $userName,
|
|
@#
|
|
@# This is a site-specific email message.
|
|
@# EOF
|
|
@#
|
|
@$Conf{EMailNoBackupRecentSubj} = undef;
|
|
@$Conf{EMailNoBackupRecentMesg} = undef;
|
|
@
|
|
@#
|
|
@# How old the most recent backup of Outlook files has to be before
|
|
@# notifying user.
|
|
@#
|
|
@$Conf{EMailNotifyOldOutlookDays} = 5.0;
|
|
@
|
|
@#
|
|
@# This subject and message is sent to a user if their Outlook files have
|
|
@# not recently been backed up (ie: more than $Conf{EMailNotifyOldOutlookDays}
|
|
@# days ago).
|
|
@#
|
|
@# These values are language-dependent. The default versions can be
|
|
@# found in the language file (eg: lib/BackupPC/Lang/en.pm). If you
|
|
@# need to change the message, copy it here and edit it, eg:
|
|
@#
|
|
@# $Conf{EMailOutlookBackupMesg} = <<'EOF';
|
|
@# To: $user$domain
|
|
@# cc:
|
|
@# Subject: $subj
|
|
@#
|
|
@# Dear $userName,
|
|
@#
|
|
@# This is a site-specific email message.
|
|
@# EOF
|
|
@#
|
|
@$Conf{EMailOutlookBackupSubj} = undef;
|
|
@$Conf{EMailOutlookBackupMesg} = undef;
|
|
@
|
|
@#
|
|
@# Additional email headers. If you change the charset
|
|
@# to utf8 then BackupPC_sendEmail will use utf8 for
|
|
@# the email body.
|
|
@#
|
|
@$Conf{EMailHeaders} = <<EOF;
|
|
@MIME-Version: 1.0
|
|
@Content-Type: text/plain; charset="iso-8859-1"
|
|
@EOF
|
|
@
|
|
@###########################################################################
|
|
@# CGI user interface configuration settings
|
|
@# (can be overridden in the per-PC config.pl)
|
|
@###########################################################################
|
|
@#
|
|
@# Normal users can only access information specific to their host.
|
|
@# They can start/stop/browse/restore backups.
|
|
@#
|
|
@# Administrative users have full access to all hosts, plus overall
|
|
@# status and log information.
|
|
@#
|
|
@# The administrative users are the union of the unix/linux group
|
|
@# $Conf{CgiAdminUserGroup} and the manual list of users, separated
|
|
@# by spaces, in $Conf{CgiAdminUsers}. If you don't want a group or
|
|
@# manual list of users set the corresponding configuration setting
|
|
@# to undef or an empty string.
|
|
@#
|
|
@# If you want every user to have admin privileges (careful!), set
|
|
@# $Conf{CgiAdminUsers} = '*'.
|
|
@#
|
|
@# Examples:
|
|
@# $Conf{CgiAdminUserGroup} = 'admin';
|
|
@# $Conf{CgiAdminUsers} = 'craig celia';
|
|
@# --> administrative users are the union of group admin, plus
|
|
@# craig and celia.
|
|
@#
|
|
@# $Conf{CgiAdminUserGroup} = '';
|
|
@# $Conf{CgiAdminUsers} = 'craig celia';
|
|
@# --> administrative users are only craig and celia'.
|
|
@#
|
|
@$Conf{CgiAdminUserGroup} = 'backuppc';
|
|
@$Conf{CgiAdminUsers} = 'backuppc';
|
|
@
|
|
@#
|
|
@# URL of the BackupPC_Admin CGI script. Used for email messages.
|
|
@#
|
|
@$Conf{CgiURL} = 'http://'.$Conf{ServerHost}.'/backuppc/index.cgi';
|
|
@
|
|
@#
|
|
@# Language to use. See lib/BackupPC/Lang for the list of supported
|
|
@# languages, which include English (en), French (fr), Spanish (es),
|
|
@# German (de), Italian (it), Dutch (nl), Polish (pl), Portuguese
|
|
@# Brazillian (pt_br) and Chinese (zh_CH).
|
|
@#
|
|
@# Currently the Language setting applies to the CGI interface and email
|
|
@# messages sent to users. Log files and other text are still in English.
|
|
@#
|
|
@$Conf{Language} = 'fr';
|
|
@
|
|
@#
|
|
@# User names that are rendered by the CGI interface can be turned
|
|
@# into links into their home page or other information about the
|
|
@# user. To set this up you need to create two sprintf() strings,
|
|
@# that each contain a single '%s' that will be replaced by the user
|
|
@# name. The default is a mailto: link.
|
|
@#
|
|
@# $Conf{CgiUserHomePageCheck} should be an absolute file path that
|
|
@# is used to check (via "-f") that the user has a valid home page.
|
|
@# Set this to undef or an empty string to turn off this check.
|
|
@#
|
|
@# $Conf{CgiUserUrlCreate} should be a full URL that points to the
|
|
@# user's home page. Set this to undef or an empty string to turn
|
|
@# off generation of URLs for user names.
|
|
@#
|
|
@# Example:
|
|
@# $Conf{CgiUserHomePageCheck} = '/var/www/html/users/%s.html';
|
|
@# $Conf{CgiUserUrlCreate} = 'http://myhost/users/%s.html';
|
|
@# --> if /var/www/html/users/craig.html exists, then 'craig' will
|
|
@# be rendered as a link to http://myhost/users/craig.html.
|
|
@#
|
|
@$Conf{CgiUserHomePageCheck} = '';
|
|
@$Conf{CgiUserUrlCreate} = 'mailto:%s@crans.org';
|
|
@
|
|
@#
|
|
@# Date display format for CGI interface. A value of 1 uses US-style
|
|
@# dates (MM/DD), a value of 2 uses full YYYY-MM-DD format, and zero
|
|
@# for international dates (DD/MM).
|
|
@#
|
|
@$Conf{CgiDateFormatMMDD} = 1;
|
|
@
|
|
@#
|
|
@# If set, the complete list of hosts appears in the left navigation
|
|
@# bar pull-down for administrators. Otherwise, just the hosts for which
|
|
@# the user is listed in the host file (as either the user or in moreUsers)
|
|
@# are displayed.
|
|
@#
|
|
@$Conf{CgiNavBarAdminAllHosts} = 1;
|
|
@
|
|
@#
|
|
@# Enable/disable the search box in the navigation bar.
|
|
@#
|
|
@$Conf{CgiSearchBoxEnable} = 1;
|
|
@
|
|
@#
|
|
@# Additional navigation bar links. These appear for both regular users
|
|
@# and administrators. This is a list of hashes giving the link (URL)
|
|
@# and the text (name) for the link. Specifying lname instead of name
|
|
@# uses the language specific string (ie: $Lang->{lname}) instead of
|
|
@# just literally displaying name.
|
|
@#
|
|
@$Conf{CgiNavBarLinks} = [
|
|
@ {
|
|
@ link => "?action=view&type=docs",
|
|
@ lname => "Documentation", # actually displays $Lang->{Documentation}
|
|
@ },
|
|
@ {
|
|
@ link => "http://backuppc.wiki.sourceforge.net",
|
|
@ name => "Wiki", # displays literal "Wiki"
|
|
@ },
|
|
@ {
|
|
@ link => "http://backuppc.sourceforge.net",
|
|
@ name => "SourceForge", # displays literal "SourceForge"
|
|
@ },
|
|
@];
|
|
@
|
|
@#
|
|
@# Hilight colors based on status that are used in the PC summary page.
|
|
@#
|
|
@$Conf{CgiStatusHilightColor} = {
|
|
@ Reason_backup_failed => '#ffcccc',
|
|
@ Reason_backup_done => '#ccffcc',
|
|
@ Reason_no_ping => '#ffff99',
|
|
@ Reason_backup_canceled_by_user => '#ff9900',
|
|
@ Status_backup_in_progress => '#66cc99',
|
|
@ Disabled_OnlyManualBackups => '#d1d1d1',
|
|
@ Disabled_AllBackupsDisabled => '#d1d1d1',
|
|
@};
|
|
@
|
|
@#
|
|
@# Additional CGI header text.
|
|
@#
|
|
@$Conf{CgiHeaders} = '<meta http-equiv="pragma" content="no-cache">';
|
|
@
|
|
@#
|
|
@# Directory where images are stored. This directory should be below
|
|
@# Apache's DocumentRoot. This value isn't used by BackupPC but is
|
|
@# used by configure.pl when you upgrade BackupPC.
|
|
@#
|
|
@# Example:
|
|
@# $Conf{CgiImageDir} = '/usr/local/apache/htdocs/BackupPC';
|
|
@#
|
|
@$Conf{CgiImageDir} = '/usr/share/backuppc/image';
|
|
@
|
|
@#
|
|
@# Additional mappings of file name extenions to Content-Type for
|
|
@# individual file restore. See $Ext2ContentType in BackupPC_Admin
|
|
@# for the default setting. You can add additional settings here,
|
|
@# or override any default settings. Example:
|
|
@#
|
|
@# $Conf{CgiExt2ContentType} = {
|
|
@# 'pl' => 'text/plain',
|
|
@# };
|
|
@#
|
|
@$Conf{CgiExt2ContentType} = { };
|
|
@
|
|
@#
|
|
@# URL (without the leading http://host) for BackupPC's image directory.
|
|
@# The CGI script uses this value to serve up image files.
|
|
@#
|
|
@# Example:
|
|
@# $Conf{CgiImageDirURL} = '/BackupPC';
|
|
@#
|
|
@$Conf{CgiImageDirURL} = '/backuppc/image';
|
|
@
|
|
@#
|
|
@# CSS stylesheet "skin" for the CGI interface. It is stored
|
|
@# in the $Conf{CgiImageDir} directory and accessed via the
|
|
@# $Conf{CgiImageDirURL} URL.
|
|
@#
|
|
@# For BackupPC v3.x several color, layout and font changes were made.
|
|
@# The previous v2.x version is available as BackupPC_stnd_orig.css, so
|
|
@# if you prefer the old skin, change this to BackupPC_stnd_orig.css.
|
|
@#
|
|
@$Conf{CgiCSSFile} = 'BackupPC_stnd.css';
|
|
@
|
|
@#
|
|
@# Whether the user is allowed to edit their per-PC config.
|
|
@#
|
|
@$Conf{CgiUserConfigEditEnable} = 1;
|
|
@
|
|
@#
|
|
@# Which per-host config variables a non-admin user is allowed
|
|
@# to edit. Admin users can edit all per-host config variables,
|
|
@# even if disabled in this list.
|
|
@#
|
|
@# SECURITY WARNING: Do not let users edit any of the Cmd
|
|
@# config variables! That's because a user could set a
|
|
@# Cmd to a shell script of their choice and it will be
|
|
@# run as the BackupPC user. That script could do all
|
|
@# sorts of bad things.
|
|
@#
|
|
@$Conf{CgiUserConfigEdit} = {
|
|
@ FullPeriod => 1,
|
|
@ IncrPeriod => 1,
|
|
@ FullKeepCnt => 1,
|
|
@ FullKeepCntMin => 1,
|
|
@ FullAgeMax => 1,
|
|
@ IncrKeepCnt => 1,
|
|
@ IncrKeepCntMin => 1,
|
|
@ IncrAgeMax => 1,
|
|
@ IncrLevels => 1,
|
|
@ IncrFill => 1,
|
|
@ PartialAgeMax => 1,
|
|
@ RestoreInfoKeepCnt => 1,
|
|
@ ArchiveInfoKeepCnt => 1,
|
|
@ BackupFilesOnly => 1,
|
|
@ BackupFilesExclude => 1,
|
|
@ BackupsDisable => 1,
|
|
@ BlackoutBadPingLimit => 1,
|
|
@ BlackoutGoodCnt => 1,
|
|
@ BlackoutPeriods => 1,
|
|
@ BackupZeroFilesIsFatal => 1,
|
|
@ ClientCharset => 1,
|
|
@ ClientCharsetLegacy => 1,
|
|
@ XferMethod => 1,
|
|
@ XferLogLevel => 1,
|
|
@ SmbShareName => 1,
|
|
@ SmbShareUserName => 1,
|
|
@ SmbSharePasswd => 1,
|
|
@ SmbClientFullCmd => 0,
|
|
@ SmbClientIncrCmd => 0,
|
|
@ SmbClientRestoreCmd => 0,
|
|
@ TarShareName => 1,
|
|
@ TarFullArgs => 1,
|
|
@ TarIncrArgs => 1,
|
|
@ TarClientCmd => 0,
|
|
@ TarClientRestoreCmd => 0,
|
|
@ TarClientPath => 0,
|
|
@ RsyncShareName => 1,
|
|
@ RsyncdClientPort => 1,
|
|
@ RsyncdPasswd => 1,
|
|
@ RsyncdUserName => 1,
|
|
@ RsyncdAuthRequired => 1,
|
|
@ RsyncCsumCacheVerifyProb => 1,
|
|
@ RsyncArgs => 1,
|
|
@ RsyncRestoreArgs => 1,
|
|
@ RsyncClientCmd => 0,
|
|
@ RsyncClientRestoreCmd => 0,
|
|
@ RsyncClientPath => 0,
|
|
@ ArchiveDest => 1,
|
|
@ ArchiveComp => 1,
|
|
@ ArchivePar => 1,
|
|
@ ArchiveSplit => 1,
|
|
@ ArchiveClientCmd => 0,
|
|
@ FixedIPNetBiosNameCheck => 1,
|
|
@ NmbLookupCmd => 0,
|
|
@ NmbLookupFindHostCmd => 0,
|
|
@ PingMaxMsec => 1,
|
|
@ PingCmd => 0,
|
|
@ ClientTimeout => 1,
|
|
@ MaxOldPerPCLogFiles => 1,
|
|
@ CompressLevel => 1,
|
|
@ ClientNameAlias => 1,
|
|
@ DumpPreUserCmd => 0,
|
|
@ DumpPostUserCmd => 0,
|
|
@ RestorePreUserCmd => 0,
|
|
@ RestorePostUserCmd => 0,
|
|
@ ArchivePreUserCmd => 0,
|
|
@ ArchivePostUserCmd => 0,
|
|
@ DumpPostShareCmd => 0,
|
|
@ DumpPreShareCmd => 0,
|
|
@ UserCmdCheckStatus => 0,
|
|
@ EMailNotifyMinDays => 1,
|
|
@ EMailFromUserName => 1,
|
|
@ EMailAdminUserName => 1,
|
|
@ EMailUserDestDomain => 1,
|
|
@ EMailNoBackupEverSubj => 1,
|
|
@ EMailNoBackupEverMesg => 1,
|
|
@ EMailNotifyOldBackupDays => 1,
|
|
@ EMailNoBackupRecentSubj => 1,
|
|
@ EMailNoBackupRecentMesg => 1,
|
|
@ EMailNotifyOldOutlookDays => 1,
|
|
@ EMailOutlookBackupSubj => 1,
|
|
@ EMailOutlookBackupMesg => 1,
|
|
@ EMailHeaders => 1,
|
|
@};
|