# -*- coding: utf-8; mode: python -*-

include("ip")
include("arpwatch")

info["owner"] = "root"
info["group"] = "root"
info["perms"] = 0644

import config.dns

header("""
Les modifications locales sont a mettre dans le fichier /etc/network/interfaces.local

Voir http://wiki.crans.org/CransTechnique/Bcfg2/... pour plus d'explications.
""")

configured_ifaces=[]

def dev(interface, mode, additionnals=[]):
    """Generation de la conf d'une interface:

    - additionnals contient des lignes a mettre en plus a la definition"""
    configured_ifaces.append(interface)

    if mode == "pub":
        print """auto %(interface)s
iface %(interface)s inet static
    address %(ip)s
    network 138.231.136.0
    netmask 255.255.248.0
    broadcast 138.231.143.255
    mtu 1496
    gateway 138.231.136.4
    dns-nameservers %(nameservers)s
    dns-search crans.org""" % { 'interface': interface, 'ip': pubip(), 'nameservers': ' '.join(config.dns.recursiv['fil']) }
    
        for line in additionnals:
            print "   ", line
        print

        pub6(interface)

    elif mode == "wifi":
        print """auto %(interface)s
iface %(interface)s inet static
    address %(ip)s
    network 138.231.144.0
    netmask 255.255.248.0
    broadcast 138.231.151.255
    mtu 1496
    dns-nameservers %(nameservers)s
    dns-search wifi.crans.org""" % { 'interface': interface, 'ip': wifiip(), 'nameservers': ' '.join(config.dns.recursiv['wifi']) }

        for line in additionnals:
            print "   ", line
        print

    elif mode == "adm":
        print """auto %(interface)s
iface %(interface)s inet static
    address %(ip)s
    network 10.231.136.0
    netmask 255.255.255.0
    broadcast 10.231.136.255
    mtu 1496
    dns-nameservers %(nameservers)s
    dns-search adm.crans.org""" % { 'interface': interface, 'ip': admip(), 'nameservers': ' '.join(config.dns.recursiv['adm']) }

        for line in additionnals:
            print "   ", line
        print

        adm6(interface)

    elif mode == "radin":
        print """auto %(interface)s
iface %(interface)s inet static
    address %(ip)s
    network 10.42.0.0
    netmask 255.255.0.0
    broadcast 10.42.255.255
    mtu 1496""" % { 'interface': interface, 'ip': radinip() }
        print
        radin6(interface)

    elif mode == "accueil":
        print """auto %(interface)s
iface %(interface)s inet static
    address %(ip)s
    network 10.51.0.0
    netmask 255.255.0.0
    broadcast 10.51.255.255
    mtu 1496""" % { 'interface': interface, 'ip': accueilip() }

    elif mode == "ens":
        print """auto %(interface)s
iface %(interface)s inet static
    address %(ip)s
    network 10.2.9.0
    netmask 255.255.255.0
    broadcast 10.2.9.255
    mtu 1496""" % { 'interface': interface, 'ip': appt_ens_ip() }

    elif mode == "isolement":
        print """auto %(interface)s
iface %(interface)s inet static
    address %(ip)s
    network 10.52.0.0
    netmask 255.255.0.0
    broadcast 10.52.255.255
    mtu 1496""" % { 'interface': interface, 'ip': isolementip() }

    elif mode == "manuel":
        print """auto %(interface)s
iface %(interface)s inet static""" % { 'interface': interface }

    elif mode == "vide":
        try:
            iface, vlan = interface.split('.')
        except ValueError:
            vlan = None
        if vlan:
            print """auto %(interface)s
iface %(interface)s inet manual
    pre-up vconfig add %(iface)s %(vlan)s
    post-down vconfig rem %(iface)s.%(vlan)s
    up ip l set %(interface)s up
    down ip l set %(interface)s down""" % { 'interface': interface, 'iface':iface,'vlan':vlan }
        else:
            print """auto %(interface)s
iface %(interface)s inet manual
    up ip l set %(interface)s up
    down ip l set %(interface)s down""" % { 'interface': interface }

    else:
        raise NotImplementedError, "Mode de reseau inconnu : %s" % mode

    if mode != "pub" and mode != "adm" and mode != "wifi" :
        for line in additionnals:
            print "   ", line
        print

# Definitions communes
print """auto lo
iface lo inet loopback
"""

# Pour arpwatch, on surveille nos réseaux
def otherlisteners():
    print "#Interfaces d'ecoute restantes pour arpwatch "
    for vlan in watched_vlans:
        if vlan == 1:
            iface = 'eth0'
        else:
            iface = 'eth0.%d' % vlan
        if not iface in configured_ifaces:
            dev(iface,'vide')

def pubip6(If):
     if len(If_Mac[If].split(':'))<4: alt = ':'
     else: alt = ''
     return "2a01:240:fe3d:4:" + alt + If_Mac[If]

def admip6(If):
     if len(If_Mac[If].split(':'))<4: alt = ':'
     else: alt = ''
     return "2a01:240:fe3d:c804:" + alt + If_Mac[If]

def radinip6(If):
     if len(If_Mac[If].split(':'))<4: alt = ':'
     else: alt = ''
     return "2001:470:c8b9:a4:" + alt + If_Mac[If]

def pub6(interface, mode = 'serveur'):
    """ fonction permettant d'ajouter une adressse ipv6 a l'interface donnee en argument.
    Le mode permet de faire la distinction entre les simples serveurs et les routeurs.
    """
    print """iface %(interface)s inet6 static
    address %(ip6)s
    netmask 64""" % { 'interface': interface, 'ip6': pubip6(interface) }
    if mode == 'serveur':
        print '    gateway fe80::1'
    elif mode == 'routeur':
        # Le routeur est le ::1 du réseau
        add_ip = ['2a01:240:fe3d:4::1/64', 'fe80::1/64']
        for ip in add_ip:
            print '    up ip a add %s dev $IFACE' % ip
            print '    down ip a delete %s dev $IFACE' % ip
    print '    up /sbin/sysctl net/ipv6/conf/$IFACE/autoconf=0'
    print

def adm6(interface):
    print """iface %(interface)s inet6 static
    address %(ip6)s
    netmask 64""" % { 'interface': interface, 'ip6': admip6(interface) }
    print

def radin6(interface):
    print """iface %(interface)s inet6 static
    address %(ip6)s
    netmask 64""" % { 'interface': interface, 'ip6': radinip6(interface) }
    print

Probe_Mac = metadata.Probes["mac"].split('\n')
If_Mac = dict(zip(Probe_Mac[:-1:2], Probe_Mac[1::2]))

exec(str(metadata.Probes["interfaces_local"]))