# -*- coding: utf-8; mode: python -*-

include("ip")

info["owner"] = "root"
info["group"] = "root"

header("""
Fichier de configuration de NRPE, client Nagios.

Pour des informations détaillées, consulter 
http://nagios.sourceforge.net/docs/nrpe/NRPE.pdf
http://wiki.crans.org/CransTechnique/ConfigurationNagios
""")

@# LOG FACILITY
@# The syslog facility that should be used for logging purposes.
@
@log_facility=daemon
@
@# PID FILE
@# The name of the file in which the NRPE daemon should write it's process ID
@# number.  The file is only written if the NRPE daemon is started by the root
@# user and is running in standalone mode.
@
@pid_file=/var/run/nagios/nrpe.pid
@
@# PORT NUMBER
@# Port number we should wait for connections on.
@# NOTE: This must be a non-priviledged port (i.e. > 1024).
@# NOTE: This option is ignored if NRPE is running under either inetd or xinetd
@
@server_port=5666
@
@# SERVER ADDRESS
@# Address that nrpe should bind to in case there are more than one interface
@# and you do not want nrpe to bind on all interfaces.
@# NOTE: This option is ignored if NRPE is running under either inetd or xinetd
@
%server_address=admip()
@
@# NRPE USER
@# This determines the effective user that the NRPE daemon should run as.  
@# You can either supply a username or a UID.
@# 
@# NOTE: This option is ignored if NRPE is running under either inetd or xinetd
@
@nrpe_user=nagios
@
@# NRPE GROUP
@# This determines the effective group that the NRPE daemon should run as.  
@# You can either supply a group name or a GID.
@# 
@# NOTE: This option is ignored if NRPE is running under either inetd or xinetd
@
@nrpe_group=nagios
@
@# ALLOWED HOST ADDRESSES
@# This is an optional comma-delimited list of IP address or hostnames 
@# that are allowed to talk to the NRPE daemon. Network addresses with a bit mask
@# (i.e. 192.168.1.0/24) are also supported. Hostname wildcards are not currently 
@# supported.
@#
@# Note: The daemon only does rudimentary checking of the client's IP
@# address.  I would highly recommend adding entries in your /etc/hosts.allow
@# file to allow only the specified host to connect to the port
@# you are running this daemon on.
@#
@# NOTE: This option is ignored if NRPE is running under either inetd or xinetd
@
@allowed_hosts=10.231.136.81
@ 
@# COMMAND ARGUMENT PROCESSING
@# This option determines whether or not the NRPE daemon will allow clients
@# to specify arguments to commands that are executed.  This option only works
@# if the daemon was configured with the --enable-command-args configure script
@# option.  
@#
@# *** ENABLING THIS OPTION IS A SECURITY RISK! *** 
@# Read the SECURITY file for information on some of the security implications
@# of enabling this variable.
@#
@# Values: 0=do not allow arguments, 1=allow command arguments
@
@dont_blame_nrpe=1
@
@# COMMAND PREFIX
@# This option allows you to prefix all commands with a user-defined string.
@# A space is automatically added between the specified prefix string and the
@# command line from the command definition.
@#
@# *** THIS EXAMPLE MAY POSE A POTENTIAL SECURITY RISK, SO USE WITH CAUTION! ***
@# Usage scenario: 
@# Execute restricted commmands using sudo.  For this to work, you need to add
@# the nagios user to your /etc/sudoers.  An example entry for alllowing 
@# execution of the plugins from might be:
@#
@# nagios          ALL=(ALL) NOPASSWD: /usr/lib/nagios/plugins/
@#
@# This lets the nagios user run all commands in that directory (and only them)
@# without asking for a password.  If you do this, make sure you don't give
@# random users write access to that directory or its contents!
@
@# command_prefix=/usr/bin/sudo 
@
@# DEBUGGING OPTION
@# This option determines whether or not debugging messages are logged to the
@# syslog facility.
@# Values: 0=debugging off, 1=debugging on
@
@debug=0
@
@# COMMAND TIMEOUT
@# This specifies the maximum number of seconds that the NRPE daemon will
@# allow plugins to finish executing before killing them off.
@
@command_timeout=60
@
@# CONNECTION TIMEOUT
@# This specifies the maximum number of seconds that the NRPE daemon will
@# wait for a connection to be established before exiting. This is sometimes
@# seen where a network problem stops the SSL being established even though
@# all network sessions are connected. This causes the nrpe daemons to
@# accumulate, eating system resources. Do not set this too low.
@
@connection_timeout=300
@
@# WEEK RANDOM SEED OPTION
@# This directive allows you to use SSL even if your system does not have
@# a /dev/random or /dev/urandom (on purpose or because the necessary patches
@# were not applied). The random number generator will be seeded from a file
@# which is either a file pointed to by the environment valiable $RANDFILE
@# or $HOME/.rnd. If neither exists, the pseudo random number generator will
@# be initialized and a warning will be issued.
@# Values: 0=only seed from /dev/[u]random, 1=also seed from weak randomness
@
@#allow_weak_random_seed=1
@
@
@
@# INCLUDE CONFIG FILE
@# This directive allows you to include definitions from an external config file.
@
@#include=<somefile.cfg>
@
@
@
@# INCLUDE CONFIG DIRECTORY
@# This directive allows you to include definitions from config files (with a
@# .cfg extension) in one or more directories (with recursion).
@
@#include_dir=<somedirectory>
@#include_dir=<someotherdirectory>
@
@
@
@# COMMAND DEFINITIONS
@# Command definitions that this daemon will run.  Definitions
@# are in the following format:
@#
@# command[<command_name>]=<command_line>
@#
@# When the daemon receives a request to return the results of <command_name>
@# it will execute the command specified by the <command_line> argument.
@#
@# Unlike Nagios, the command line cannot contain macros - it must be
@# typed exactly as it should be executed.
@#
@# Note: Any plugins that are used in the command lines must reside
@# on the machine that this daemon is running on!  The examples below
@# assume that you have plugins installed in a /usr/local/nagios/libexec
@# directory.  Also note that you will have to modify the definitions below
@# to match the argument format the plugins expect.  Remember, these are
@# examples only!
@
@
@# The following examples use hardcoded command arguments...
@
@command[check_users]=/usr/lib/nagios/plugins/check_users -w $ARG1$ -c $ARG2$
@command[check_load]=/usr/lib/nagios/plugins/check_load -w $ARG1$ -c $ARG2$
@command[check_all_disks]=/usr/lib/nagios/plugins/check_disk -w $ARG1$ -c $ARG2$
@command[check_procs]=/usr/lib/nagios/plugins/check_procs -w $ARG1$ -c $ARG2$


@# The following examples allow user-supplied arguments and can
@# only be used if the NRPE daemon was compiled with support for 
@# command arguments *AND* the dont_blame_nrpe directive in this
@# config file is set to '1'.  This poses a potential security risk, so
@# make sure you read the SECURITY file before doing this.
@
@#command[check_users]=/usr/lib/nagios/plugins/check_users -w $ARG1$ -c $ARG2$
@#command[check_load]=/usr/lib/nagios/plugins/check_load -w $ARG1$ -c $ARG2$
@#command[check_disk]=/usr/lib/nagios/plugins/check_disk -w $ARG1$ -c $ARG2$ -p $ARG3$
@#command[check_procs]=/usr/lib/nagios/plugins/check_procs -w $ARG1$ -c $ARG2$ -s $ARG3$
@
@#
@# local configuration:
@#       if you'd prefer, you can instead place directives here
@include=/etc/nagios/nrpe_local.cfg
@
@# 
@# you can place your config snipplets into nrpe.d/
@# only snipplets ending in .cfg will get included
@include_dir=/etc/nagios/nrpe.d/